Melola Discovery

← Melola Discovery

Jurnal Tanpa peringkat SINTA

PENINGKATAN HASIL BELAJAR MATA PELAJARAN PEMPROGRAMAN CNC DASAR MENGGUNAKAN SOFTWARE SIMULASI SWANSOFT SINUMERIK 802Se/C

JMEL : Journal of Mechanical Engineering Learning · Vol. 3 No. 1 (2014)

ISSN
2252-651X, 2252-651X
Terbit
2014-08-15
Penerbit
Jurusan Teknik Mesin, Fakultas Teknik, Universitas Negeri Semarang
Bahasa
eng

Abstrak

Destination of this research is how to use this software simulation swansoft able to improve the practice of 3 grade students on courses machining base CNC use CNC machine type Sinumerik 802Se/c turning. The population was 3 grade students of Machinical Engineering Education skill courses totaling 62 of 2 class. Methods of data collection using the documentation and performance test also observation sheet. The result showed that there was an incrase in students learning outcomes pre-test score was 6,38 after initially getting treatment increased by 7,76. This is in contrast with the control group increased pre-test score 6,33 to 6,99. The result of the test T post-test obtained t = 12,024 for practice. Therefore, tcount=10,943 > ttable = 1,67. Therefore, the implementation software simulation swansoft would make a better outcome to the students.

Jaringan kolaborasi para penulis

27 penulis · 82 tautan kepenulisan bersama · 23 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Halu Oleo
  • Politeknik Negeri Malang
  • Indonesia University of Education
  • State University of Malang
  • Diponegoro University
  • Universitas Gadjah Mada
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Nurnaningsih HamzahUniversitas Halu Oleo2
Sitti MarwahUniversitas Halu Oleo1
Niken PujirahayuUniversitas Halu Oleo1
Nurhayati HadjarUniversitas Halu Oleo1
Zakiah UslinawatyUniversitas Halu Oleo1
Mustika SariUniversitas Halu Oleo1
Sahindomi BanaUniversitas Halu Oleo1
Abigael KabeUniversitas Halu Oleo1
Rosmarlinasiah RosmarlinasiahUniversitas Halu Oleo1
I Made Arya IrmawanAfiliasi tidak diketahui1
La Ode Agus Salim MandoAfiliasi tidak diketahui1
Yusran YusranUniversitas Halu Oleo1
Muh. DassirAfiliasi tidak diketahui1
Adhetya KurniawanAfiliasi tidak diketahui1
Alif Dimas SunaryoAfiliasi tidak diketahui1
Anies SetiowatiAfiliasi tidak diketahui1
Poppy PuspitasariState University of Malang1
Diki Dwi PramonoState University of Malang1
Haipan SalamIndonesia University of Education1
Mohammad TauviqirrahmanDiponegoro University1
SuryantoAfiliasi tidak diketahui1
Sugeng Hadi SusiloPoliteknik Negeri Malang1
Eko YudiyantoPoliteknik Negeri Malang1
Khambali KhambaliPoliteknik Negeri Malang1
Falih AlauddinPoliteknik Negeri Malang1
IkaputraUniversitas Gadjah Mada1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unnes.ac.id/sju/index.php/jmel/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 6 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">PENINGKATAN HASIL BELAJAR MATA PELAJARAN PEMPROGRAMAN CNC DASAR MENGGUNAKAN SOFTWARE SIMULASI SWANSOFT SINUMERIK 802Se/C</dc:title>
	<dc:creator>Setiawan, Agus</dc:creator>
	<dc:description xml:lang="en-US">Destination of this research is how to use this software simulation swansoft able to improve the practice of 3 grade students on courses machining base CNC use CNC machine type Sinumerik 802Se/c turning. The population was 3 grade students of Machinical Engineering Education skill courses totaling 62 of 2 class. Methods of data collection using the documentation and performance test also observation sheet. The result showed that there was an incrase in students learning outcomes pre-test score was 6,38 after initially getting treatment increased by 7,76. This is in contrast with the control group increased pre-test score 6,33 to 6,99. The result of the test T post-test obtained t = 12,024 for practice. Therefore,  tcount=10,943 &amp;gt; ttable = 1,67. Therefore, the implementation software simulation swansoft would make a better outcome to the students.</dc:description>
	<dc:publisher xml:lang="en-US">Jurusan Teknik Mesin, Fakultas Teknik, Universitas Negeri Semarang</dc:publisher>
	<dc:date>2014-08-15</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unnes.ac.id/sju/jmel/article/view/4502</dc:identifier>
	<dc:source xml:lang="en-US">JMEL : Journal of Mechanical Engineering Learning; Vol 3 No 1 (2014)</dc:source>
	<dc:source>2252-651X</dc:source>
	<dc:source>2252-651X</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.unnes.ac.id/sju/jmel/article/view/4502/4156</dc:relation>
</oai_dc:dc>