Melola Discovery

← Melola Discovery

Akses terbuka Jurnal Tanpa peringkat SINTA

Conductive Polymers in Microbial Fuel Cells for Bioelectricity Generation

Journal of Clean Technology · Vol. 3 No. 2 (2026) · hlm. 21–38

DOI
10.15294/joct.v3i2.64436
ISSN
2460-9811, 2460-8874
Terbit
2026-10-15
Penerbit
Universitas Negeri Semarang
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-nc-nd/4.0

Abstrak

Microbial fuel cells (MFCs) offer simultaneous wastewater treatment and electricity generation, but their practical performance is limited by inefficient extracellular electron transfer (EET) and interfacial losses at the electrode–biofilm interface. Conductive polymers (CPs), particularly polyaniline (PANI), polypyrrole (PPy), and poly(3,4-ethylenedioxythiophene) (PEDOT), have therefore been investigated as electrode modifiers because their electrical, electrochemical, and surface properties can be tailored to support biofilm development and electron transfer. This review critically evaluates reported evidence for CP-modified MFC electrodes, with emphasis on electrochemical performance, EET-related mechanisms, microbial interactions, real-wastewater applications, stability, and scale-up limitations. Laboratory studies demonstrate substantial performance improvements under controlled conditions. For example, PANI nanofiber-modified carbon cloth reached 1,091 mW m⁻², PPy/MXene-modified graphite felt reached 264 mW m⁻² (vs. 45 mW m⁻² for bare graphite felt), and a PEDOT-modified graphite-felt system treating palm oil mill effluent reported a maximum current density of 3.5 A m⁻² and a Coulombic efficiency of 51%. However, these results are difficult to compare directly because studies differ in electrode architecture, reactor configuration, substrate, inoculum, and performance normalization. Evidence for specific CP-mediated EET mechanisms also remains limited, particularly for distinguishing direct, mediated, and long-distance electron-transfer contributions. More importantly, long-term operation with real wastewater and pilot-scale CP-modified systems remains insufficiently investigated. Existing pilot-scale MFC studies without CP modification demonstrate that performance under real wastewater conditions can differ substantially from laboratory results. Future research should therefore prioritize standardized performance reporting, matched real-wastewater comparisons, long-term stability testing, pilot-scale validation, mechanistic EET characterization, and fabrication-cost assessment. Overall, CPs show considerable potential for improving MFC electrode performance, but their practical and economic advantages over conventional electrodes remain to be established under realistic operating conditions.

Kata kunci

Jaringan kolaborasi para penulis

5 penulis · 10 tautan kepenulisan bersama · 6 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Cukurova University
  • Skyline University Nigeria
  • Sharda University
  • Federal Polytechnic Kabo
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unnes.ac.id/journals/joct/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Conductive Polymers in Microbial Fuel Cells for Bioelectricity Generation</dc:title>
	<dc:creator xml:lang="en">Zahraddin Zubair Mahmud</dc:creator>
	<dc:creator xml:lang="en">Maryam Muawuya Dauda</dc:creator>
	<dc:creator xml:lang="en">Umar Dahiru</dc:creator>
	<dc:creator xml:lang="en">Zainab Garba Musa</dc:creator>
	<dc:creator xml:lang="en">Aisha Auwal Umar</dc:creator>
	<dc:subject xml:lang="en">Conductive polymers</dc:subject>
	<dc:subject xml:lang="en">extracellular electron transfer</dc:subject>
	<dc:subject xml:lang="en">microbial fuel cells</dc:subject>
	<dc:subject xml:lang="en">polyaniline </dc:subject>
	<dc:subject xml:lang="en">polypyrrole</dc:subject>
	<dc:description xml:lang="en">Microbial fuel cells (MFCs) offer simultaneous wastewater treatment and electricity generation, but their practical performance is limited by inefficient extracellular electron transfer (EET) and interfacial losses at the electrode–biofilm interface. Conductive polymers (CPs), particularly polyaniline (PANI), polypyrrole (PPy), and poly(3,4-ethylenedioxythiophene) (PEDOT), have therefore been investigated as electrode modifiers because their electrical, electrochemical, and surface properties can be tailored to support biofilm development and electron transfer. This review critically evaluates reported evidence for CP-modified MFC electrodes, with emphasis on electrochemical performance, EET-related mechanisms, microbial interactions, real-wastewater applications, stability, and scale-up limitations. Laboratory studies demonstrate substantial performance improvements under controlled conditions. For example, PANI nanofiber-modified carbon cloth reached 1,091 mW m⁻², PPy/MXene-modified graphite felt reached 264 mW m⁻² (vs. 45 mW m⁻² for bare graphite felt), and a PEDOT-modified graphite-felt system treating palm oil mill effluent reported a maximum current density of 3.5 A m⁻² and a Coulombic efficiency of 51%. However, these results are difficult to compare directly because studies differ in electrode architecture, reactor configuration, substrate, inoculum, and performance normalization. Evidence for specific CP-mediated EET mechanisms also remains limited, particularly for distinguishing direct, mediated, and long-distance electron-transfer contributions. More importantly, long-term operation with real wastewater and pilot-scale CP-modified systems remains insufficiently investigated. Existing pilot-scale MFC studies without CP modification demonstrate that performance under real wastewater conditions can differ substantially from laboratory results. Future research should therefore prioritize standardized performance reporting, matched real-wastewater comparisons, long-term stability testing, pilot-scale validation, mechanistic EET characterization, and fabrication-cost assessment. Overall, CPs show considerable potential for improving MFC electrode performance, but their practical and economic advantages over conventional electrodes remain to be established under realistic operating conditions.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Semarang</dc:publisher>
	<dc:date>2026-10-15</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unnes.ac.id/journals/joct/article/view/64436</dc:identifier>
	<dc:identifier>10.15294/joct.v3i2.64436</dc:identifier>
	<dc:source xml:lang="en">Journal of Clean Technology; Vol. 3 No. 2 (2026): August 2026; 21-38</dc:source>
	<dc:source>2460-9811</dc:source>
	<dc:source>2460-8874</dc:source>
	<dc:source>10.15294/joct.v3i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.unnes.ac.id/journals/joct/article/view/64436/11640</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 Zahraddin Zubair Mahmud, Maryam Muawuya Dauda, Umar Dahiru (Author); Zainab Garba Musa, Aisha Auwal Umar (Translator)</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by-nc-nd/4.0</dc:rights>
</oai_dc:dc>