Melola Discovery

← Melola Discovery

Jurnal Tanpa peringkat SINTA

Optimization of Turning Parameters for Aluminum Machining with High-Speed Steel (HSS) Tools: A Literature Review

Journal of Mechanical Engineering Education · Vol. 1 No. 1 (2026) · hlm. 21–27

Terbit
2026-06-30
Penerbit
Universitas Negeri Semarang
Bahasa
eng

Abstrak

The turning process is one of the most widely used machining operations in the manufacturing industry, particularly for aluminum materials due to their lightweight characteristics, corrosion resistance, and excellent machinability. The quality of turning operations is significantly influenced by cutting parameters, namely cutting speed (Vc), feed rate (f), and depth of cut (ap). Therefore, optimizing these parameters is essential to achieve high-quality machining performance and efficient production. This study aims to review and compare the optimal turning parameters for aluminum materials using High-Speed Steel (HSS) cutting tools. The research was conducted through a literature review of scientific publications related to the optimization of cutting parameters in aluminum turning processes. The reviewed studies were analyzed to evaluate the effects of cutting speed, feed rate, and depth of cut on surface quality, tool wear, and machining performance. The findings indicate that increasing cutting speed generally improves surface quality up to a certain limit by providing more stable cutting conditions. In contrast, lower feed rates tend to produce smoother surfaces, while moderate depths of cut contribute to a balance between productivity and machining quality. Furthermore, appropriate parameter selection can reduce tool wear and extend tool life. In conclusion, although the optimal cutting parameter combination depends on the machining objective, high cutting speed, low feed rate, and moderate depth of cut are generally recommended to achieve optimal turning performance in aluminum machining using HSS cutting tools.

Kata kunci

Jaringan kolaborasi para penulis

6 penulis · 15 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unnes.ac.id/journals/jomee/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Optimization of Turning Parameters for Aluminum Machining with High-Speed Steel (HSS) Tools: A Literature Review</dc:title>
	<dc:creator xml:lang="en">Hanif, Muhammad Naufal</dc:creator>
	<dc:creator xml:lang="en">Nuraditya, Catur Ryan</dc:creator>
	<dc:creator xml:lang="en">Kristyawan, Niko</dc:creator>
	<dc:creator xml:lang="en">Murtadho, Irsyad</dc:creator>
	<dc:creator xml:lang="en">Maycilano, Bimma</dc:creator>
	<dc:creator xml:lang="en">Adriano, Muhammad Ridho</dc:creator>
	<dc:subject xml:lang="en">Turning</dc:subject>
	<dc:subject xml:lang="en">Aluminum</dc:subject>
	<dc:subject xml:lang="en">Cutting Parameters</dc:subject>
	<dc:subject xml:lang="en">High-Speed Steel (HSS) Tool</dc:subject>
	<dc:subject xml:lang="en">Optimization</dc:subject>
	<dc:description xml:lang="en">The turning process is one of the most widely used machining operations in the manufacturing industry, particularly for aluminum materials due to their lightweight characteristics, corrosion resistance, and excellent machinability. The quality of turning operations is significantly influenced by cutting parameters, namely cutting speed (Vc), feed rate (f), and depth of cut (ap). Therefore, optimizing these parameters is essential to achieve high-quality machining performance and efficient production. This study aims to review and compare the optimal turning parameters for aluminum materials using High-Speed Steel (HSS) cutting tools. The research was conducted through a literature review of scientific publications related to the optimization of cutting parameters in aluminum turning processes. The reviewed studies were analyzed to evaluate the effects of cutting speed, feed rate, and depth of cut on surface quality, tool wear, and machining performance. The findings indicate that increasing cutting speed generally improves surface quality up to a certain limit by providing more stable cutting conditions. In contrast, lower feed rates tend to produce smoother surfaces, while moderate depths of cut contribute to a balance between productivity and machining quality. Furthermore, appropriate parameter selection can reduce tool wear and extend tool life. In conclusion, although the optimal cutting parameter combination depends on the machining objective, high cutting speed, low feed rate, and moderate depth of cut are generally recommended to achieve optimal turning performance in aluminum machining using HSS cutting tools.
 </dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Semarang</dc:publisher>
	<dc:date>2026-06-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unnes.ac.id/journals/jomee/article/view/53980</dc:identifier>
	<dc:source xml:lang="en">Journal of Mechanical Engineering Education; Vol. 1 No. 1 (2026): June; 21-27</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.unnes.ac.id/journals/jomee/article/view/53980/10793</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 Journal of Mechanical Engineering Education</dc:rights>
</oai_dc:dc>