Jurnal
Comparative Structural Analysis of Stainless Steel Shelving Designs Under Static Storage Loads Using ANSYS Workbench 2024 R1
Journal of Mechanical Engineering Education · Vol. 1 No. 1 (2026) · hlm. 1–13
Terbit 2026-07-24
Penerbit Universitas Negeri Semarang
Bahasa eng
Abstrak
The rapid growth of the manufacturing industry has increased the demand for efficient and reliable storage systems, making the structural strength of iron racks a critical factor in industrial and warehouse environments. This study aims to compare the structural performance of two iron rack designs with different shelf panel configurations, namely a solid flat plate design (Design 1) and a perforated/slat panel design (Design 2), under various static storage loads using ANSYS Workbench 2024 R1. Both designs were modeled in three dimensions using Autodesk Inventor with identical main frame dimensions and Stainless Steel as the material for all components. Finite Element Analysis (FEA) with the Static Structural module was applied by imposing four load variations ranging from 80 kg to 140 kg with fixed support boundary conditions at the rack feet. The parameters analyzed include Equivalent (von-Mises) Stress, Total Deformation, Safety Factor, and Equivalent Elastic Strain. The simulation results show that Design 1 produces a maximum von-Mises stress of 2.6354 × 10⁶ Pa, a total deformation of 9.8967 × 10⁻⁶ m, and an equivalent elastic strain of 1.5243 × 10⁻⁵ m/m, all of which are lower than Design 2, which recorded values of 2.6894 × 10⁶ Pa, 2.6174 × 10⁻⁵ m, and 1.6429 × 10⁻⁵ m/m, respectively. Both designs achieved a Safety Factor of 15, indicating a very high level of structural safety. Design 1 is recommended for applications requiring a flat and stable bearing surface, while Design 2 is more suitable for applications prioritizing air circulation and material efficiency.
Jaringan kolaborasi para penulis
16 penulis ·
38 tautan kepenulisan bersama
· 6 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Sunan Kalijaga State Islamic University Yogyakarta UIN Raden Mas Said Surakarta Sunan Gunung Djati State Islamic University Bandung Indonesia University of Education Institut Kemandirian Nusantara Afiliasi tidak diketahui
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.
Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unnes.ac.id/journals/jomee/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
<dc:title xml:lang="en">Comparative Structural Analysis of Stainless Steel Shelving Designs Under Static Storage Loads Using ANSYS Workbench 2024 R1</dc:title>
<dc:creator xml:lang="en">Zaky, Muhammad</dc:creator>
<dc:creator xml:lang="en">Rohman, Nur</dc:creator>
<dc:creator xml:lang="en">Regitania, Fernanda</dc:creator>
<dc:creator xml:lang="en">Wafa, Zaenul</dc:creator>
<dc:creator xml:lang="en">Robani, Muhamad Auna Febrian</dc:creator>
<dc:creator xml:lang="en">Ghaisan, Razan Hafiz</dc:creator>
<dc:subject xml:lang="en">Ansys Workbench</dc:subject>
<dc:subject xml:lang="en">Finite Element Analysis</dc:subject>
<dc:subject xml:lang="en">Iron Rack</dc:subject>
<dc:subject xml:lang="en">Stainless Steel</dc:subject>
<dc:subject xml:lang="en">Structural Analysis</dc:subject>
<dc:description xml:lang="en">The rapid growth of the manufacturing industry has increased the demand for efficient and reliable storage systems, making the structural strength of iron racks a critical factor in industrial and warehouse environments. This study aims to compare the structural performance of two iron rack designs with different shelf panel configurations, namely a solid flat plate design (Design 1) and a perforated/slat panel design (Design 2), under various static storage loads using ANSYS Workbench 2024 R1. Both designs were modeled in three dimensions using Autodesk Inventor with identical main frame dimensions and Stainless Steel as the material for all components. Finite Element Analysis (FEA) with the Static Structural module was applied by imposing four load variations ranging from 80 kg to 140 kg with fixed support boundary conditions at the rack feet. The parameters analyzed include Equivalent (von-Mises) Stress, Total Deformation, Safety Factor, and Equivalent Elastic Strain. The simulation results show that Design 1 produces a maximum von-Mises stress of 2.6354 × 10⁶ Pa, a total deformation of 9.8967 × 10⁻⁶ m, and an equivalent elastic strain of 1.5243 × 10⁻⁵ m/m, all of which are lower than Design 2, which recorded values of 2.6894 × 10⁶ Pa, 2.6174 × 10⁻⁵ m, and 1.6429 × 10⁻⁵ m/m, respectively. Both designs achieved a Safety Factor of 15, indicating a very high level of structural safety. Design 1 is recommended for applications requiring a flat and stable bearing surface, while Design 2 is more suitable for applications prioritizing air circulation and material efficiency.
</dc:description>
<dc:publisher xml:lang="en">Universitas Negeri Semarang</dc:publisher>
<dc:date>2026-07-24</dc:date>
<dc:type>info:eu-repo/semantics/article</dc:type>
<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
<dc:format>application/pdf</dc:format>
<dc:identifier>https://journal.unnes.ac.id/journals/jomee/article/view/53998</dc:identifier>
<dc:source xml:lang="en">Journal of Mechanical Engineering Education; Vol. 1 No. 1 (2026): June; 1-13</dc:source>
<dc:language>eng</dc:language>
<dc:relation>https://journal.unnes.ac.id/journals/jomee/article/view/53998/10765</dc:relation>
<dc:rights xml:lang="en">Copyright (c) 2026 Journal of Mechanical Engineering Education</dc:rights>
</oai_dc:dc>
Sitasi dan pengindeksan
OpenAlex
Belum diperiksa
Crossref
Tidak ditemukan
Jumlah menurut tiap indeks pada 9 Nov 2026; setiap indeks menghitung sitasi dengan cara berbeda.
Sitasi artikel ini
APA 7
Zaky, M., Rohman, N., Regitania, F., Wafa, Z., Robani, M. A. F., & Ghaisan, R. H. (2026). Comparative Structural Analysis of Stainless Steel Shelving Designs Under Static Storage Loads Using ANSYS Workbench 2024 R1. Journal of Mechanical Engineering Education, 1(1), 1–13. https://journal.unnes.ac.id/journals/jomee/article/view/53998
Salin
IEEE
M. Zaky, N. Rohman, F. Regitania, Z. Wafa, M. A. F. Robani, and R. H. Ghaisan, “Comparative Structural Analysis of Stainless Steel Shelving Designs Under Static Storage Loads Using ANSYS Workbench 2024 R1,” Journal of Mechanical Engineering Education, vol. 1, no. 1, pp. 1–13, 2026.
Salin
Dibuat dari metadata jurnal; periksa nama penulis sebelum dipakai.