Melola Discovery

← Melola Discovery

Jurnal Tanpa peringkat SINTA

Comparison of Carbide and HSS Cutting Tool Performance in Turning of Stainless Steel (AISI 304): A Literature Review

Journal of Mechanical Engineering Education · Vol. 1 No. 1 (2026) · hlm. 14–20

Terbit
2026-06-30
Penerbit
Universitas Negeri Semarang
Bahasa
eng

Abstrak

Carbide and High-Speed Steel (HSS) cutting tools are the two most commonly used tool materials in turning processes; however, a systematic comparison of their performance on difficult-to-machine materials such as AISI 304 austenitic stainless steel remains limited. AISI 304 exhibits low thermal conductivity, a strong work hardening tendency, and high affinity between the workpiece and tool, which accelerates tool wear and degrades surface quality. This systematic literature review follows PRISMA guidelines and analyzes studies from 2013–2025 retrieved from Scopus, ScienceDirect, MDPI, and ResearchGate databases. Performance comparison was conducted based on four primary parameters: tool life, surface roughness (Ra), cutting force (Fc), and cutting temperature, under dry, flood cooling, and minimum quantity lubrication (MQL) conditions. The review findings indicate that coated carbide tools consistently outperform HSS tools across all parameters, particularly at medium-to-high cutting speed ranges, owing to their superior thermal resistance and ability to suppress built-up edge formation. NF-MQL and internally cooled tool (ICT) cooling strategies proved to be the most effective in reducing tool wear while simultaneously improving surface quality compared to conventional flood cooling. HSS tools remain economically relevant for low-speed and intermittent cutting in small-scale production settings. Identified research gaps include the scarcity of standardized direct comparisons, the underexplored potential of micro-textures on modern HSS tools, and the absence of a universal predictive model for tool selection on difficult-to-cut materials.

Kata kunci

Jaringan kolaborasi para penulis

6 penulis · 15 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unnes.ac.id/journals/jomee/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Comparison of Carbide and HSS Cutting Tool Performance in Turning of Stainless Steel (AISI 304): A Literature Review</dc:title>
	<dc:creator xml:lang="en">Aldiansyah, Raditya Alvin</dc:creator>
	<dc:creator xml:lang="en">Kabir, Armando</dc:creator>
	<dc:creator xml:lang="en">Saputra, Aji Prasetya</dc:creator>
	<dc:creator xml:lang="en">Irvansyah, Nur Syamsi</dc:creator>
	<dc:creator xml:lang="en">Hanif, Muhammad Wi'am</dc:creator>
	<dc:creator xml:lang="en">Putranto, Laurensius Verdians</dc:creator>
	<dc:subject xml:lang="en">AISI 304</dc:subject>
	<dc:subject xml:lang="en">Coated Carbide</dc:subject>
	<dc:subject xml:lang="en">Tool Wear</dc:subject>
	<dc:subject xml:lang="en">HSS Cutting Tool</dc:subject>
	<dc:subject xml:lang="en">Systematic Literature Review</dc:subject>
	<dc:description xml:lang="en">Carbide and High-Speed Steel (HSS) cutting tools are the two most commonly used tool materials in turning processes; however, a systematic comparison of their performance on difficult-to-machine materials such as AISI 304 austenitic stainless steel remains limited. AISI 304 exhibits low thermal conductivity, a strong work hardening tendency, and high affinity between the workpiece and tool, which accelerates tool wear and degrades surface quality. This systematic literature review follows PRISMA guidelines and analyzes studies from 2013–2025 retrieved from Scopus, ScienceDirect, MDPI, and ResearchGate databases. Performance comparison was conducted based on four primary parameters: tool life, surface roughness (Ra), cutting force (Fc), and cutting temperature, under dry, flood cooling, and minimum quantity lubrication (MQL) conditions. The review findings indicate that coated carbide tools consistently outperform HSS tools across all parameters, particularly at medium-to-high cutting speed ranges, owing to their superior thermal resistance and ability to suppress built-up edge formation. NF-MQL and internally cooled tool (ICT) cooling strategies proved to be the most effective in reducing tool wear while simultaneously improving surface quality compared to conventional flood cooling. HSS tools remain economically relevant for low-speed and intermittent cutting in small-scale production settings. Identified research gaps include the scarcity of standardized direct comparisons, the underexplored potential of micro-textures on modern HSS tools, and the absence of a universal predictive model for tool selection on difficult-to-cut materials.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Semarang</dc:publisher>
	<dc:date>2026-06-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unnes.ac.id/journals/jomee/article/view/54417</dc:identifier>
	<dc:source xml:lang="en">Journal of Mechanical Engineering Education; Vol. 1 No. 1 (2026): June; 14-20</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.unnes.ac.id/journals/jomee/article/view/54417/10794</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 Journal of Mechanical Engineering Education</dc:rights>
</oai_dc:dc>