Melola Discovery

← Melola Discovery

Jurnal Tanpa peringkat SINTA

Analysis of the Effect of Cutting Speed on Surface Quality in AISI 1045 Steel Turning: A Systematic Literature Review

Journal of Mechanical Engineering Education · Vol. 1 No. 1 (2026) · hlm. 38–43

Terbit
2026-07-24
Penerbit
Universitas Negeri Semarang
Bahasa
eng

Abstrak

Surface quality is one of the important parameters in the turning process because it affects the performance and service life of mechanical components. Cutting speed is a cutting parameter that has a significant influence on the quality of the machining surface. This study aims to analyze the effect of cutting speed on surface quality in the turning process of AISI 1045 Steel using the Systematic Literature Review (SLR) method. Four relevant studies were included in the final synthesis. Data were obtained through the search and selection of relevant scientific articles based on the inclusion and exclusion criteria that have been set. The results of the study show that increasing the cutting speed to the optimum range tends to reduce the surface roughness value (Ra) because the cutting process occurs more stably and the formation of built-up edges can be minimized. Conversely, Excessively high cutting speeds can increase cutting temperature and tool wear, resulting in decreased surface quality. In addition to cutting speed, other factors such as feed rate, cutting depth, chisel material, and the use of coolant also affect the surface quality of the turning. Therefore, optimization of cutting parameters is necessary to obtain optimal surface quality in the turning of AISI 1045 Steel.

Kata kunci

Jaringan kolaborasi para penulis

5 penulis · 10 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unnes.ac.id/journals/jomee/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Analysis of the Effect of Cutting Speed on Surface Quality in AISI 1045 Steel Turning: A Systematic Literature Review</dc:title>
	<dc:creator xml:lang="en">Mushaffa, Ahnaf Dzikra</dc:creator>
	<dc:creator xml:lang="en">Widiyanto, Raditya Rafli Adimas</dc:creator>
	<dc:creator xml:lang="en">Kurnia, Indra</dc:creator>
	<dc:creator xml:lang="en">Isnanto, Alifiansyah Zaky</dc:creator>
	<dc:creator xml:lang="en">Najib, Mohammad Ainun</dc:creator>
	<dc:subject xml:lang="en">AISI 1045 Steel</dc:subject>
	<dc:subject xml:lang="en">Cutting Speed</dc:subject>
	<dc:subject xml:lang="en">Surface Roughness</dc:subject>
	<dc:subject xml:lang="en">Turning</dc:subject>
	<dc:subject xml:lang="en">Systematic Literature Review</dc:subject>
	<dc:description xml:lang="en">Surface quality is one of the important parameters in the turning process because it affects the performance and service life of mechanical components. Cutting speed is a cutting parameter that has a significant influence on the quality of the machining surface. This study aims to analyze the effect of cutting speed on surface quality in the turning process of AISI 1045 Steel using the Systematic Literature Review (SLR) method. Four relevant studies were included in the final synthesis.  Data were obtained through the search and selection of relevant scientific articles based on the inclusion and exclusion criteria that have been set. The results of the study show that increasing the cutting speed to the optimum range tends to reduce the surface roughness value (Ra) because  the cutting process occurs more stably and the formation of built-up edges can be minimized. Conversely,  Excessively high cutting speeds can increase cutting temperature and tool wear, resulting in decreased surface quality. In addition to cutting speed, other factors such as feed rate, cutting depth, chisel material, and the use of coolant also affect the surface quality of the turning. Therefore, optimization of cutting parameters is necessary to obtain optimal surface quality in the turning of AISI 1045 Steel.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Semarang</dc:publisher>
	<dc:date>2026-07-24</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unnes.ac.id/journals/jomee/article/view/54441</dc:identifier>
	<dc:source xml:lang="en">Journal of Mechanical Engineering Education; Vol. 1 No. 1 (2026): June; 38-43</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.unnes.ac.id/journals/jomee/article/view/54441/10823</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 Journal of Mechanical Engineering Education</dc:rights>
</oai_dc:dc>