Melola Discovery

← Melola Discovery

Jurnal Tanpa peringkat SINTA

Systematic Literature Review: The Effect of Depth of Cut on Surface Roughness in the Lathe Process

Journal of Mechanical Engineering Education · Vol. 1 No. 1 (2026) · hlm. 28–37

Terbit
2026-07-24
Penerbit
Universitas Negeri Semarang
Bahasa
eng

Abstrak

Surface roughness is a critical indicator of machining quality because it influences component friction, wear resistance, dimensional performance, and service life. Among the primary turning parameters, depth of cut affects material-removal productivity but may also increase cutting forces, vibration, and surface irregularities. This study systematically examined the effect of depth of cut on surface roughness in turning processes and identified the factors that influence this relationship. A systematic literature review was conducted by searching Scopus, ScienceDirect, Google Scholar, and other relevant academic sources using keywords related to depth of cut, surface roughness, turning processes, and cutting parameters. Articles were selected through identification, screening, eligibility assessment, and final inclusion stages. Twenty Scopus-indexed articles published between 2016 and 2026 met the inclusion criteria and were analyzed descriptively. The findings indicate that increasing the depth of cut generally increases surface roughness because of higher cutting forces, machining vibration, tool loading, and material deformation. However, the magnitude and direction of this effect vary according to workpiece material, feed rate, cutting speed, tool geometry, cooling conditions, and machine stability. Several studies found that feed rate contributed more strongly to surface roughness than depth of cut, demonstrating that machining parameters should not be evaluated independently. Therefore, optimal surface quality requires an integrated selection of depth of cut and other machining parameters. Future research should investigate advanced alloys and composite materials and develop artificial-intelligence-based prediction models to optimize machining productivity, tool life, and surface quality.

Kata kunci

Jaringan kolaborasi para penulis

6 penulis · 15 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unnes.ac.id/journals/jomee/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Systematic Literature Review: The Effect of Depth of Cut on Surface Roughness in the Lathe Process</dc:title>
	<dc:creator xml:lang="en">Satria Sasikirana</dc:creator>
	<dc:creator xml:lang="en">Hakim, Muhammad Ikhsanul</dc:creator>
	<dc:creator xml:lang="en">Praditya, Dafa Indra</dc:creator>
	<dc:creator xml:lang="en">Wicaksana, Bagas Ananta Satria</dc:creator>
	<dc:creator xml:lang="en">Arifin, Nafhan Nazal</dc:creator>
	<dc:creator xml:lang="en">Muhammad, Danendra Falla</dc:creator>
	<dc:subject xml:lang="en">Depth of Cut</dc:subject>
	<dc:subject xml:lang="en">, surface roughness</dc:subject>
	<dc:subject xml:lang="en">Turning Process</dc:subject>
	<dc:subject xml:lang="en">Cutting Parameters</dc:subject>
	<dc:subject xml:lang="en">Systematic Literature Review</dc:subject>
	<dc:description xml:lang="en">Surface roughness is a critical indicator of machining quality because it influences component friction, wear resistance, dimensional performance, and service life. Among the primary turning parameters, depth of cut affects material-removal productivity but may also increase cutting forces, vibration, and surface irregularities. This study systematically examined the effect of depth of cut on surface roughness in turning processes and identified the factors that influence this relationship. A systematic literature review was conducted by searching Scopus, ScienceDirect, Google Scholar, and other relevant academic sources using keywords related to depth of cut, surface roughness, turning processes, and cutting parameters. Articles were selected through identification, screening, eligibility assessment, and final inclusion stages. Twenty Scopus-indexed articles published between 2016 and 2026 met the inclusion criteria and were analyzed descriptively. The findings indicate that increasing the depth of cut generally increases surface roughness because of higher cutting forces, machining vibration, tool loading, and material deformation. However, the magnitude and direction of this effect vary according to workpiece material, feed rate, cutting speed, tool geometry, cooling conditions, and machine stability. Several studies found that feed rate contributed more strongly to surface roughness than depth of cut, demonstrating that machining parameters should not be evaluated independently. Therefore, optimal surface quality requires an integrated selection of depth of cut and other machining parameters. Future research should investigate advanced alloys and composite materials and develop artificial-intelligence-based prediction models to optimize machining productivity, tool life, and surface quality.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Semarang</dc:publisher>
	<dc:date>2026-07-24</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unnes.ac.id/journals/jomee/article/view/54450</dc:identifier>
	<dc:source xml:lang="en">Journal of Mechanical Engineering Education; Vol. 1 No. 1 (2026): June; 28-37</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.unnes.ac.id/journals/jomee/article/view/54450/10798</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 Journal of Mechanical Engineering Education</dc:rights>
</oai_dc:dc>