Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

The impact of high temperature and irradiance source on the efficiency of polycrystalline photovoltaic panel in a controlled environment

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 10 No. 4 (2020)

DOI
10.11591/ijece.v10i4.pp3942-3947
ISSN
2722-2578, 2088-8708
Published
2020-08-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-sa/4.0

Abstract

Solar cells are highly sensitive to temperature, which affects its operating parameters. The study has its aim in accessing the impact of temperature (in excess above the maximum operating cell temperature) and irradiance source on the efficiency of polycrystalline photovoltaic (PV) solar panels in an environment where the temperature and irradiance level can be fully controlled. For the study to achieve its aim, a solar box and tungsten light bulbs were used to create an environment where the irradiance level and the temperature can be controlled. The solar panel was placed inside the solar box facing the light source while the irradiance level and temperature were measured and held constant. Results show a steady decrease in voltage with increasing temperature while the performance ratio and efficiency of the photovoltaic module followed a similar trend as that of voltage once the temperature exceeds the maximum operating cell temperature. Results also show the output voltage of the photovoltaic to be higher under the tungsten light than the sun, but the efficiency achieved by the photovoltaic under the sun far exceeds that obtained under the tungsten light.

Collaboration network of the authors

9 authors · 17 co-authorship links · 14 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • University of Cross River State
  • Sukkur IBA University
  • North China Electric Power University
  • University of Calabar
  • University of Oulu
  • Beijing Institute of Technology
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Joel IlokeUniversity of Cross River State2
Mangi Fareed HussainSukkur IBA University2
Jerry KumarNorth China Electric Power University1
Nanik Ram ParhyarBeijing Institute of Technology1
Danish KhanNorth China Electric Power University1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>The impact of high temperature and irradiance source on the efficiency of polycrystalline photovoltaic panel in a controlled environment</dc:title><dc:creator>Ogbulezie, Julie C.</dc:creator><dc:creator>Njok, Armstrong O.</dc:creator><dc:creator>Panjwani, Manoj Kumar</dc:creator><dc:creator>Panjwani, Suresh K.</dc:creator><dc:description>&lt;jats:p&gt;Solar cells are highly sensitive to temperature, which affects its operating parameters. The study has its aim in accessing the impact of temperature (in excess above the maximum operating cell temperature) and irradiance source on the efficiency of polycrystalline photovoltaic (PV) solar panels in an environment where the temperature and irradiance level can be fully controlled. For the study to achieve its aim, a solar box and tungsten light bulbs were used to create an environment where the irradiance level and the temperature can be controlled. The solar panel was placed inside the solar box facing the light source while the irradiance level and temperature were measured and held constant. Results show a steady decrease in voltage with increasing temperature while the performance ratio and efficiency of the photovoltaic module followed a similar trend as that of voltage once the temperature exceeds the maximum operating cell temperature. Results also show the output voltage of the photovoltaic to be higher under the tungsten light than the sun, but the efficiency achieved by the photovoltaic under the sun far exceeds that obtained under the tungsten light.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2020-08-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v10i4.pp3942-3947</dc:identifier><dc:identifier>10.11591/ijece.v10i4.pp3942-3947</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 10 No 4 (2020); 3942</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/21351/14066</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>