Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

Design and investigations of MPPT strategies for a wind energy conversion system based on doubly fed induction generator

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 10 No. 5 (2020)

DOI
10.11591/ijece.v10i5.pp4770-4781
ISSN
2722-2578, 2088-8708
Published
2020-10-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc/4.0

Abstract

The purpose of this work is to design and to discuss various strategies to optimize the production of a wind energy conversion chain based on the doubly fed induction generator (DFIG), by capturing the maximum power at the wind turbine, using maximum power point tracking (MPPT) and pitch control. The proposed controls allow the generator to monitor the optimal operating points of the turbines regardless of wind speed variations, system parameters disturbance, and parameters variation. Simulation of WECS based on a 1.5 MW wound rotor induction generator under MATLAB/SIMULINK is carried out using the PI controller (PIC), RST controller and fuzzy logic controller (FLC). Analysis and comparisons are made for different operating scenarios: Reference tracking, robustness under variable wind speed conditions and parameters variation. The application of FLC provides a very interesting outcome for the robustness and the dynamic challenges.

Collaboration network of the authors

22 authors · 53 co-authorship links · 22 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Université Hassan 1er
  • University of Hassan II Casablanca
  • Université Moulay Ismail de Meknes
  • Royal Military College of Canada
  • École Supérieure d'Électronique de l'Ouest
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Mohammed El MalahUniversité Hassan 1er4
Mhamed MadarkUniversité Hassan 1er3
Abdellfattah Ba-RazzoukUniversité Hassan 1er3
Mohamed AboulfatahUniversité Hassan 1er2
M'hammed GuisserUniversité Hassan 1er2
Hamid BennisUniversité Moulay Ismail de Meknes2
Hicham BahriUniversity of Hassan II Casablanca1
Abdelghani BoudaoudUniversité Hassan 1er1
M. El HaroussiAffiliation unknown1
Mohamed LatrachÉcole Supérieure d'Électronique de l'Ouest1
Mohamed IhamjiUniversité Hassan 1er1
Mostafa HefnawiRoyal Military College of Canada1
Ahmed MoutabirUniversity of Hassan II Casablanca1
Jamal ZbitouUniversité Hassan 1er1
Khalifa EchchakhaouiUniversité Hassan 1er1
Abderrahim TaouniUniversity of Hassan II Casablanca1
Abdelwahed TouatiUniversity of Hassan II Casablanca1
Radouane MajdoulUniversity of Hassan II Casablanca1
Abderrahmane OuchattiUniversity of Hassan II Casablanca1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Design and investigations of MPPT strategies for a wind energy conversion system based on doubly fed induction generator</dc:title><dc:creator>Rached, Bouchaib</dc:creator><dc:creator>Elharoussi, Mustapha</dc:creator><dc:creator>Abdelmounim, Elhassane</dc:creator><dc:description>&lt;jats:p&gt;The purpose of this work is to design and to discuss various strategies to optimize the production of a wind energy conversion chain based on the doubly fed induction generator (DFIG), by capturing the maximum power at the wind turbine, using maximum power point tracking (MPPT) and pitch control. The proposed controls allow the generator to monitor the optimal operating points of the turbines regardless of wind speed variations, system parameters disturbance, and parameters variation. Simulation of WECS based on a 1.5 MW wound rotor induction generator under MATLAB/SIMULINK is carried out using the PI controller (PIC), RST controller and fuzzy logic controller (FLC). Analysis and comparisons are made for different operating scenarios: Reference tracking, robustness under variable wind speed conditions and parameters variation. The application of FLC provides a very interesting outcome for the robustness and the dynamic challenges.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2020-10-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v10i5.pp4770-4781</dc:identifier><dc:identifier>10.11591/ijece.v10i5.pp4770-4781</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 10 No 5 (2020); 4770</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/20752/14188</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>