Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

The Effects of ZnO particles on the color homogeneity of phosphor-converted high-power white LED light sources

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 10 No. 5 (2020)

DOI
10.11591/ijece.v10i5.pp5155-5161
ISSN
2722-2578, 2088-8708
Published
2020-10-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc/4.0

Abstract

Color homogeneity is one of the goals to continuously improve WLED. Among the methods for enhancing the color uniformity of WLEDs, improving scattering in phosphor layer is considered to be the most effective. In this paper, ZnO is used for that purpose. The results show that ZnO particle size significantly affects scattering in the phosphor layer, which is a vital factor to analyze scattering, scattering sand surface, scattering coefficient and scattered phase function C_sca (D,λ), μ_sca (λ) and ρ(θ,λ). In addition, the concentration of ZnO was also analyzed with values from 2% to 22%. Color homogeneity depends not only on size but also on the concentration of added ZnO. Therefore, color homogeneity control is the control of ZnO size and concentration. The proposed result is 10% ZnO for the highest lumen of LED. With 14% and 500 nm of ZnO particles, ΔCCT reaches the lowest. Depending on the production needs, manufacturers can choose the most appropriate way. However, with both required lumen and ΔCCT, 14% ZnO is suitable for ZnO sizes.

Collaboration network of the authors

16 authors · 45 co-authorship links · 44 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Ton Duc Thang University
  • Industrial University of Ho Chi Minh City
  • Thu Dau Mot University
  • Posts and Telecommunications Institute of Technology
  • Nha Trang University
  • Ho Chi Minh City University of Industry and Trade
  • Vietnam Academy of Science and Technology
  • Other organisations
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Thuc Minh BuiNha Trang University9
My Hanh Nguyen ThiIndustrial University of Ho Chi Minh City6
Phan Xuan LeHo Chi Minh City University of Industry and Trade4
Le Van ThoVietnam Academy of Science and Technology4
Anh Tuan LeTon Duc Thang University3
Huu Phuc DangIndustrial University of Ho Chi Minh City3
Hoàng Văn NgọcThu Dau Mot University2
Phung Ton ThatIndustrial University of Ho Chi Minh City2
Nguyen Thi Kim ChungThu Dau Mot University2
Sang Dang HoTon Duc Thang University1
Thanh Tùng NguyễnThu Dau Mot University1
Tri-Vien VuTon Duc Thang University1
Anh Tuan LeTon Duc Thang University1
Nguyen Le ThaiTrường ĐH Nguyễn Tất Thành1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>The Effects of ZnO particles on the color homogeneity of phosphor-converted high-power white LED light sources</dc:title><dc:creator>Phuong Loan, Nguyen Thi</dc:creator><dc:creator>Quoc Anh, Nguyen Doan</dc:creator><dc:description>&lt;jats:p&gt;Color homogeneity is one of the goals to continuously improve WLED. Among the methods for enhancing the color uniformity of WLEDs, improving scattering in phosphor layer is considered to be the most effective. In this paper, ZnO is used for that purpose. The results show that ZnO particle size significantly affects scattering in the phosphor layer, which is a vital factor to analyze scattering, scattering sand surface, scattering coefficient and scattered phase function C_sca (D,λ), μ_sca (λ) and ρ(θ,λ). In addition, the concentration of ZnO was also analyzed with values from 2% to 22%. Color homogeneity depends not only on size but also on the concentration of added ZnO. Therefore, color homogeneity control is the control of ZnO size and concentration. The proposed result is 10% ZnO for the highest lumen of LED. With 14% and 500 nm of ZnO particles, ΔCCT reaches the lowest. Depending on the production needs, manufacturers can choose the most appropriate way. However, with both required lumen and ΔCCT, 14% ZnO is suitable for ZnO sizes.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2020-10-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v10i5.pp5155-5161</dc:identifier><dc:identifier>10.11591/ijece.v10i5.pp5155-5161</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 10 No 5 (2020); 5155</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/21033/14236</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>