Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Relationship of drain induced barrier lowering and top/bottom gate oxide thickness in asymmetric junctionless double gate MOSFET

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 11 No. 1 (2021)

DOI
10.11591/ijece.v11i1.pp232-239
ISSN
2722-2578, 2088-8708
Terbit
2021-02-01
Penerbit
Institute of Advanced Engineering and Science
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

The relationship of drain induced barrier lowering (DIBL) phenomenon and channel length, silicon thickness, and thicknesses of top and bottom gate oxide films is derived for asymmetric junctionless double gate (JLDG) MOSFETs. The characteristics between the drain current and the gate voltage is derived by using the potential distribution model to propose in this paper. In this case, the threshold voltage is defined as the corresponding gate voltage when the drain current is (W/L) × 10-7 A, and the DIBL representing the change in the threshold voltage with respect to the drain voltage is obtained. As a result, we observe the DIBL is proportional to the negative third power of the channel length and the second power of the silicon thickness and linearly proportional to the geometric mean of the top and bottom gate oxide thicknesses, and derive a relation such as DIBL =25.15ηL_g^(-3) t_si^2 √(t_ox1∙t_ox2 ), where η is a static feedback coefficients between 0 and 1. The η is found to be between 0.5 and 1.0 in this model. The DIBL model of this paper has been observed to be in good agreement with the result of other paper, so it can be used in circuit simulation such as SPICE.

Jaringan kolaborasi para penulis

2 penulis · 1 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Kunsan National University
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Byungon KimKunsan National University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Data ini berasal dari Crossref (yang disetorkan penerbit), karena endpoint OAI-PMH milik jurnal tidak dapat di-harvest.

Sumber metadata: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, pertama di-harvest 27 Okt 2026, terakhir terlihat 15 Nov 2026.
Metadata sebagai oai_dc, dikonversi dari Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Relationship of drain induced barrier lowering and top/bottom gate oxide thickness in asymmetric junctionless double gate MOSFET</dc:title><dc:creator>Jung, Hakkee</dc:creator><dc:description>&lt;jats:p&gt;The relationship of drain induced barrier lowering (DIBL) phenomenon and channel length, silicon thickness, and thicknesses of top and bottom gate oxide films is derived for asymmetric junctionless double gate (JLDG) MOSFETs. The characteristics between the drain current and the gate voltage is derived by using the potential distribution model to propose in this paper. In this case, the threshold voltage is defined as the corresponding gate voltage when the drain current is (W/L) × 10-7 A, and the DIBL representing the change in the threshold voltage with respect to the drain voltage is obtained. As a result, we observe the DIBL is proportional to the negative third  power of the channel length and the second power of the silicon thickness and linearly proportional to the geometric mean of the top and bottom gate oxide thicknesses, and derive a relation such as DIBL =25.15ηL_g^(-3) t_si^2 √(t_ox1∙t_ox2 ), where η is a static feedback coefficients between 0 and 1. The η is found to be between 0.5 and 1.0 in this model. The DIBL model of this paper has been observed to be in good agreement with the result of other paper, so it can be used in circuit simulation such as SPICE.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2021-02-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v11i1.pp232-239</dc:identifier><dc:identifier>10.11591/ijece.v11i1.pp232-239</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 11 No 1 (2021); 232</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/22825/14480</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>