Melola Discovery

← Melola Discovery

Jurnal Tanpa peringkat SINTA

Seismic Stiffness Evaluation of RC Dual Systems in Varying Geometries: A Pushover-Based Study Using Indonesian Codes

Jurnal Teknik Sipil dan Perencanaan · Vol. 27 No. 2 (2025) · hlm. 49–61

DOI
10.15294/jtsp.v27i2.25494
ISSN
2503-1899, 1411-1772
Terbit
2025-10-31
Penerbit
Universitas Negeri Semarang
Bahasa
eng

Abstrak

This study evaluates the seismic performance of reinforced concrete (RC) dual systems that combine moment-resisting frames with shear walls, using nonlinear pushover analysis in accordance with Indonesian seismic design codes (SNI 1726:2019 and SNI 2847:2019). A total of 32 analytical models were developed to examine the influence of four critical parameters: story height (3–10 stories), span length (5.5–6.5 m), shear wall thickness (200–250 mm), and concrete compressive strength (20–25 MPa). The elastic stiffness factor was determined as the base shear ratio to roof displacement at the onset of first hinge formation. In contrast, base shear capacity was derived from the pushover curves. Results show that geometric parameters exert the most decisive influence on seismic response, with stiffness decreasing by more than 50 percent as story height increases and by approximately 8 percent with longer spans. Material enhancements provide only modest gains of 2 to 7 percent. These findings emphasize the dominant role of structural configuration in drift control and ductility demand, offering practical recommendations for optimizing RC dual systems under Indonesian codes and improving the resilience of mid- to high-rise buildings in seismic regions.

Kata kunci

Jaringan kolaborasi para penulis

3 penulis · 2 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Muhammadiyah University of Yogyakarta
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Ahmad ZakiMuhammadiyah University of Yogyakarta1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unnes.ac.id/journals/jtsp/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Seismic Stiffness Evaluation of RC Dual Systems in Varying Geometries: A Pushover-Based Study Using Indonesian Codes</dc:title>
	<dc:creator xml:lang="en">Fuqaha, Sameh</dc:creator>
	<dc:creator xml:lang="en">Nugroho , Guntur </dc:creator>
	<dc:subject xml:lang="en">Reinforced Concrete Dual Systems</dc:subject>
	<dc:subject xml:lang="en"> Pushover Analysis</dc:subject>
	<dc:subject xml:lang="en">Elastic Stiffness Factor</dc:subject>
	<dc:subject xml:lang="en">Base Shear Capacity</dc:subject>
	<dc:subject xml:lang="en">Indonesian Seismic Code</dc:subject>
	<dc:description xml:lang="en">This study evaluates the seismic performance of reinforced concrete (RC) dual systems that combine moment-resisting frames with shear walls, using nonlinear pushover analysis in accordance with Indonesian seismic design codes (SNI 1726:2019 and SNI 2847:2019). A total of 32 analytical models were developed to examine the influence of four critical parameters: story height (3–10 stories), span length (5.5–6.5 m), shear wall thickness (200–250 mm), and concrete compressive strength (20–25 MPa). The elastic stiffness factor was determined as the base shear ratio to roof displacement at the onset of first hinge formation. In contrast, base shear capacity was derived from the pushover curves. Results show that geometric parameters exert the most decisive influence on seismic response, with stiffness decreasing by more than 50 percent as story height increases and by approximately 8 percent with longer spans. Material enhancements provide only modest gains of 2 to 7 percent. These findings emphasize the dominant role of structural configuration in drift control and ductility demand, offering practical recommendations for optimizing RC dual systems under Indonesian codes and improving the resilience of mid- to high-rise buildings in seismic regions.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Semarang</dc:publisher>
	<dc:date>2025-10-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unnes.ac.id/journals/jtsp/article/view/25494</dc:identifier>
	<dc:identifier>10.15294/jtsp.v27i2.25494</dc:identifier>
	<dc:source xml:lang="en">Jurnal Teknik Sipil dan Perencanaan; Vol. 27 No. 2 (2025): Jurnal Teknik Sipil dan Perencanaan; 49 - 61</dc:source>
	<dc:source>2503-1899</dc:source>
	<dc:source>1411-1772</dc:source>
	<dc:source>10.15294/jtsp.v27i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.unnes.ac.id/journals/jtsp/article/view/25494/6735</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2025 Jurnal Teknik Sipil dan Perencanaan</dc:rights>
</oai_dc:dc>