Melola Discovery

← Melola Discovery

Jurnal Tanpa peringkat SINTA

Effect of Steel Truss Configuration on Bridge Structural Strength and Seismic Response

Jurnal Teknik Sipil dan Perencanaan · Vol. 28 No. 1 (2026) · hlm. 39–49

DOI
10.15294/jtsp.v28i1.47805
ISSN
2503-1899, 1411-1772
Terbit
2026-07-01
Penerbit
Universitas Negeri Semarang
Bahasa
eng

Abstrak

Located within the Pacific Ring of Fire, Indonesia experiences high seismic intensity, posing a risk of structural damage to bridges; thus, seismic load considerations are imperative in bridge engineering. Although bridge seismic analysis has been conducted, comparative studies of truss configurations under seismic loads remain limited. This study analyzes the influence of truss configurations, including Howe, Pratt, Warren, Quadrangular Warren, Whipple, Camel Back, Baltimore, K-Truss, and Petit Truss, under seismic loads through deflection and Demand Capacity Ratio (DCR) parameters. The analysis was performed using Midas Civil, a Finite Element Method software, while seismic loading was applied using the response spectrum method. The results show that the Camel Back Truss achieves the highest structural efficiency, yielding the lowest DCR, with a maximum of 0.064693 and 0.1503 for the mean. Regarding serviceability, Petit Truss exhibited the minimum deflection values of 0.02735 m, 0.02482 m, and 0.02493 m for Service I (TD), Service I (TT), and Extreme I, respectively. Overall, Camel Back Truss provides the best structural performance by maintaining the lowest stress ratio and the second-lowest deflection, recorded at 0.02725 m and 0.03897 m under Service I and 0.02818 m under Extreme I loads, respectively.

Kata kunci

Jaringan kolaborasi para penulis

5 penulis · 10 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Tidar
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unnes.ac.id/journals/jtsp/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Effect of Steel Truss Configuration on Bridge Structural Strength and Seismic Response</dc:title>
	<dc:creator xml:lang="en">Lalu Samsul Aswadi</dc:creator>
	<dc:creator xml:lang="en">Dwi Sat Agus Yuwana</dc:creator>
	<dc:creator xml:lang="en">Bina Arumbinang Wajdi</dc:creator>
	<dc:creator xml:lang="en">Aisya Bhanuwati</dc:creator>
	<dc:creator xml:lang="en">Reyhan Daffa</dc:creator>
	<dc:subject xml:lang="en">bridge frame type</dc:subject>
	<dc:subject xml:lang="en">seismic load</dc:subject>
	<dc:subject xml:lang="en">bridge strength</dc:subject>
	<dc:subject xml:lang="en">SNI 2833:2016</dc:subject>
	<dc:subject xml:lang="en">bridge structural analysis</dc:subject>
	<dc:description xml:lang="en">Located within the Pacific Ring of Fire, Indonesia experiences high seismic intensity, posing a risk of structural damage to bridges; thus, seismic load considerations are imperative in bridge engineering. Although bridge seismic analysis has been conducted, comparative studies of truss configurations under seismic loads remain limited. This study analyzes the influence of truss configurations, including Howe, Pratt, Warren, Quadrangular Warren, Whipple, Camel Back, Baltimore, K-Truss, and Petit Truss, under seismic loads through deflection and Demand Capacity Ratio (DCR) parameters. The analysis was performed using Midas Civil, a Finite Element Method software, while seismic loading was applied using the response spectrum method. The results show that the Camel Back Truss achieves the highest structural efficiency, yielding the lowest DCR, with a maximum of 0.064693 and 0.1503 for the mean. Regarding serviceability, Petit Truss exhibited the minimum deflection values of 0.02735 m, 0.02482 m, and 0.02493 m for Service I (TD), Service I (TT), and Extreme I, respectively. Overall, Camel Back Truss provides the best structural performance by maintaining the lowest stress ratio and the second-lowest deflection, recorded at 0.02725 m and 0.03897 m under Service I and 0.02818 m under Extreme I loads, respectively.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Semarang</dc:publisher>
	<dc:date>2026-07-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unnes.ac.id/journals/jtsp/article/view/47805</dc:identifier>
	<dc:identifier>10.15294/jtsp.v28i1.47805</dc:identifier>
	<dc:source xml:lang="en">Jurnal Teknik Sipil dan Perencanaan; Vol. 28 No. 1 (2026): Jurnal Teknik Sipil dan Perencanaan; 39-49</dc:source>
	<dc:source>2503-1899</dc:source>
	<dc:source>1411-1772</dc:source>
	<dc:source>10.15294/jtsp.v28i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.unnes.ac.id/journals/jtsp/article/view/47805/10509</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 Jurnal Teknik Sipil dan Perencanaan</dc:rights>
</oai_dc:dc>