Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

Contactless digital tachometer using microcontroller

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 11 No. 1 (2021)

DOI
10.11591/ijece.v11i1.pp293-299
ISSN
2722-2578, 2088-8708
Published
2021-02-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-sa/4.0

Abstract

Tachometer is a device that used for counting or for the measuring purpose of the number of revolutions (that is the total number rotations made by the device in unit of measuring time) of an object in unit time. It is expressed in the unit of RPS or RPM, the model uses a set of infrared transducer receiver to count the RPM pulses, and the Arduino microcontroller is used for the implementation of the project. The individual pulses are counted by the microcontroller to give the final output of the RPM.

Collaboration network of the authors

29 authors · 97 co-authorship links · 14 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • SRM Institute of Science and Technology
  • SRM University
  • American International University-Bangladesh
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
K. SelvakumarSRM Institute of Science and Technology9
Krishnasamy VijayakumarSRM Institute of Science and Technology7
D. KarthikeyanSRM Institute of Science and Technology7
D. SelvabharathiSRM Institute of Science and Technology5
K. SaravananSRM Institute of Science and Technology2
A. VeluAffiliation unknown2
S. George FernandezSRM Institute of Science and Technology2
V. KalyanasundhramSRM Institute of Science and Technology2
Priyanka DasSRM Institute of Science and Technology1
Gaurav Kumar SinghSRM Institute of Science and Technology1
Sourav SinhaAmerican International University-Bangladesh1
Arnab NagSRM Institute of Science and Technology1
V. VenkatachalamSRM Institute of Science and Technology1
R. Mano NarayananSRM Institute of Science and Technology1
D. SaravanakumarSRM Institute of Science and Technology1
Arul Rayappan StalinSRM University1
P. GopiSRM University1
P. PonselvinSRM University1
Th. Ankit SinghSRM Institute of Science and Technology1
Anamika RanjanSRM Institute of Science and Technology1
Jatin P SinghSRM Institute of Science and Technology1
C. S. BoopathiSRM Institute of Science and Technology1
Rohit SahasrabuddheSRM Institute of Science and Technology1
Mathur Kartik HiteshkumarSRM Institute of Science and Technology1
Jay Anil PuranikSRM Institute of Science and Technology1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Contactless digital tachometer using microcontroller</dc:title><dc:creator>Palanisamy, R.</dc:creator><dc:creator>Vidyasagar, S.</dc:creator><dc:creator>Kalyanasundaram, V.</dc:creator><dc:creator>Sridhar, R.</dc:creator><dc:description>&lt;jats:p&gt;Tachometer is a device that used for counting or for the measuring purpose of the number of revolutions (that is the total number rotations made by the device in unit of measuring time) of an object in unit time. It is expressed in the unit of RPS or RPM, the model uses a set of infrared transducer receiver to count the RPM pulses, and the Arduino microcontroller is used for the implementation of the project. The individual pulses are counted by the microcontroller to give the final output of the RPM.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2021-02-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v11i1.pp293-299</dc:identifier><dc:identifier>10.11591/ijece.v11i1.pp293-299</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 11 No 1 (2021); 293</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/21579/14487</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>