Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Design and optimization of cost-effective coldproof portable enclosures for polar environment

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 10 No. 6 (2020)

DOI
10.11591/ijece.v10i6.pp6251-6259
ISSN
2722-2578, 2088-8708
Terbit
2020-12-01
Penerbit
Institute of Advanced Engineering and Science
Lisensi
creativecommons.org/licenses/by-nc/4.0

Abstrak

Based on the International Electrotechnical Commission standards, the electronic devices in the industrial class (e.g., integrated circuits or batteries) can only operate at the ambient temperature between -40°C and 85°C. For the human-involved regions in Alaska, Northern Canada, and Antarctica, extreme cold condition as low as -55°C might affect sensing electronic devices utilized in the scientific or industrial applications. In this paper, we propose a design and optimization methodology for the self-heating portable enclosures, which can warm up the inner space from -55°C for encasing the low-cost industrial-class electronic devices instead of expensive military-class ones to work reliably within their allowed operating temperature limit. Among the other options, ceramic thermal resistors are selected as the heating elements inside the enclosure. The placement of the thermal resistors is studied with the aid of thermal modelling for the single heating device by using the curve fitting technique to achieve uniform temperature distribution within the enclosure. To maintain the inner temperature above -40°C but with the least power consumption from the thermal resistors, we have developed a control system based on the fuzzy logic controller. For validation, we have utilized COMSOL Multiphysics software and then one prototyped enclosure along with the fuzzy control system. Our experimental measurement exhibits its efficacy compared to the other design options.

Jaringan kolaborasi para penulis

2 penulis · 1 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Memorial University of Newfoundland
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Data ini berasal dari Crossref (yang disetorkan penerbit), karena endpoint OAI-PMH milik jurnal tidak dapat di-harvest.

Sumber metadata: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, pertama di-harvest 27 Okt 2026, terakhir terlihat 15 Nov 2026.
Metadata sebagai oai_dc, dikonversi dari Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Design and optimization of cost-effective coldproof portable enclosures for polar environment</dc:title><dc:creator>Parsi, Behzad</dc:creator><dc:creator>Zhang, Lihong</dc:creator><dc:description>&lt;jats:p&gt;Based on the International Electrotechnical Commission standards, &#xD;
the electronic devices in the industrial class (e.g., integrated circuits or batteries) can only operate at the ambient temperature between -40°C and 85°C. For the human-involved regions in Alaska, Northern Canada, and Antarctica, extreme cold condition as low as -55°C might affect sensing electronic devices utilized in the scientific or industrial applications. In this paper, we propose a design and optimization methodology for the self-heating portable enclosures, which can warm up the inner space from -55°C for encasing the low-cost industrial-class electronic devices instead of expensive military-class ones to work reliably within their allowed operating temperature limit. Among the other options, ceramic thermal resistors are selected as the heating elements inside the enclosure. The placement of the thermal resistors is studied with the aid of thermal modelling for the single heating device by using the curve fitting technique to achieve uniform temperature distribution within the enclosure. To maintain the inner temperature above -40°C but with the least power consumption from the thermal resistors, we have developed a control system based on the fuzzy logic controller. For validation, we have utilized COMSOL Multiphysics software and then one prototyped enclosure along with the fuzzy control system. Our experimental measurement exhibits its efficacy compared to the other design options.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2020-12-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v10i6.pp6251-6259</dc:identifier><dc:identifier>10.11591/ijece.v10i6.pp6251-6259</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 10 No 6 (2020); 6251</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/21856/14412</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>