Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

Partially isolated four port converter with combined PWM and secondary phase shift control

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 11 No. 2 (2021)

DOI
10.11591/ijece.v11i2.pp1086-1094
ISSN
2722-2578, 2088-8708
Published
2021-04-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc/4.0

Abstract

A partially isolated four-port converter is proposed in this paper for interfacing two renewable sources and a storage device with an isolated load. This converter is capable of achieving high power density because of the effective sharing of devices among the input ports. Combined PWM and secondary phase shift control is employed to have a decoupled power flow management of input and output side ports. PWM control is used at the input side for maximum power tracking of renewable sources and battery power management. At the output side, secondary Phase shift control is used for controlling the output voltage. The adopted secondary phase shift control allows the primary switching legs to be operated with 1800 phase shift which results in reduced current ripple at input ports. The working principle of the converter, its output characteristics and control strategy are discussed. Working of the converter and its control strategy is verified through simulation for different input and output conditions. Further, to validate the simulation results, the experimental results of a 500W prototype are also provided.

Collaboration network of the authors

19 authors · 59 co-authorship links

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • SRM Institute of Science and Technology
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
R. PalanisamySRM Institute of Science and Technology4
K. SelvakumarSRM Institute of Science and Technology3
D. KarthikeyanSRM Institute of Science and Technology2
S. VidyasagarSRM Institute of Science and Technology2
T. M. Thamizh ThentralSRM Institute of Science and Technology2
V. VenkatachalamSRM Institute of Science and Technology1
R. Mano NarayananSRM Institute of Science and Technology1
D. SaravanakumarSRM Institute of Science and Technology1
K. SaravananSRM Institute of Science and Technology1
V. KalyanasundaramSRM Institute of Science and Technology1
D. SelvabharathiSRM Institute of Science and Technology1
S. George FernandezSRM Institute of Science and Technology1
V. KalyanasundhramSRM Institute of Science and Technology1
G. R. Prudhvi KumarSRM Institute of Science and Technology1
D. SattianadanSRM Institute of Science and Technology1
C. S. BoopathiSRM Institute of Science and Technology1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Partially isolated four port converter with combined PWM and secondary phase shift control</dc:title><dc:creator>Ranipriya, G.</dc:creator><dc:creator>Jegatheesan, R.</dc:creator><dc:creator>Vijayakumar, K.</dc:creator><dc:description>&lt;jats:p&gt;A partially isolated four-port converter is proposed in this paper for interfacing two renewable sources and a storage device with an isolated load. This converter is capable of achieving high power density because of the effective sharing of devices among the input ports. Combined PWM and secondary phase shift control is employed to have a decoupled power flow management of input and output side ports.  PWM control is used at the input side for maximum power tracking of renewable sources and battery power management. At the output side, secondary Phase shift control is used for controlling the output voltage. The adopted secondary phase shift control allows the primary switching legs to be operated with 1800 phase shift which results in reduced current ripple at input ports. The working principle of the converter, its output characteristics and control strategy are discussed. Working of the converter and its control strategy is verified through simulation for different input and output conditions. Further, to validate the simulation results, the experimental results of a 500W prototype are also provided.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2021-04-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v11i2.pp1086-1094</dc:identifier><dc:identifier>10.11591/ijece.v11i2.pp1086-1094</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 11 No 2 (2021); 1086</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/21989/14634</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>