Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Observer-based tracking control for single machine infinite bus system via flatness theory

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 11 No. 2 (2021)

DOI
10.11591/ijece.v11i2.pp1186-1199
ISSN
2722-2578, 2088-8708
Terbit
2021-04-01
Penerbit
Institute of Advanced Engineering and Science
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

In this research, we aim to use the flatness control theory to develop a useful control scheme for a single machine connected to an infinite bus (SMIB) system taking into account input magnitude and rate saturation constraints. We adopt a fourth-order nonlinear SMIB model along an exciter and a turbine governor as actuators. According to the flatness-based control strategy, first we show that the adopted nominal SMIB model is a flat system. Then, we develop a full linearizing state feedback as well as an outer integral-type loop to ensure suitable tracking performances for the power and voltage as well as the angular velocity outputs. We assume that only the angular velocity of the generator is available to be measured. So, we provide a linear Luenberger observer to estimate the remaining states of the system. Also, the saturation nonlinearities are transferred to the linear part of the system and they are canceled out using their estimations. The efficiency and usefulness of the proposed observer-controller against faults are illustrated using simulation tests in Eurostag and Matlab. The results show that the clearing critical time of the introduced methodology is larger than the classical control approaches and the proposed observer-based flatness controller exhibits over much less control energy compared to the classic IEEE controllers.

Jaringan kolaborasi para penulis

3 penulis · 3 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Laboratoire des Sciences du Numérique de Nantes
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Data ini berasal dari Crossref (yang disetorkan penerbit), karena endpoint OAI-PMH milik jurnal tidak dapat di-harvest.

Sumber metadata: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, pertama di-harvest 27 Okt 2026, terakhir terlihat 15 Nov 2026.
Metadata sebagai oai_dc, dikonversi dari Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Observer-based tracking control for single machine infinite bus system via flatness theory</dc:title><dc:creator>Aghababa, Mohammad Pourmahmood</dc:creator><dc:creator>Marinescu, Bogdan</dc:creator><dc:creator>Xavier, Florent</dc:creator><dc:description>&lt;jats:p&gt;In this research, we aim to use the flatness control theory to develop a useful control scheme for a single machine connected to an infinite bus (SMIB) system taking into account input magnitude and rate saturation constraints. We adopt a fourth-order nonlinear SMIB model along an exciter and a turbine governor as actuators. According to the flatness-based control strategy, first we show that the adopted nominal SMIB model is a flat system. Then, we develop a full linearizing state feedback as well as an outer integral-type loop to ensure suitable tracking performances for the power and voltage as well as the angular velocity outputs. We assume that only the angular velocity of the generator is available to be measured. So, we provide a linear Luenberger observer to estimate the remaining states of the system. Also, the saturation nonlinearities are transferred to the linear part of the system and they are canceled out using their estimations. The efficiency and usefulness of the proposed observer-controller against faults are illustrated using simulation tests in Eurostag and Matlab. The results show that the clearing critical time of the introduced methodology is larger than the classical control approaches and the proposed observer-based flatness controller exhibits over much less control energy compared to the classic IEEE controllers.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2021-04-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v11i2.pp1186-1199</dc:identifier><dc:identifier>10.11591/ijece.v11i2.pp1186-1199</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 11 No 2 (2021); 1186</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/21676/14645</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>