Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

Improvements on the performance of subcarrier multiplexing/wavelength division multiplexing based radio over fiber system

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 11 No. 2 (2021)

DOI
10.11591/ijece.v11i2.pp1439-1449
ISSN
2722-2578, 2088-8708
Published
2021-04-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-sa/4.0

Abstract

Radio over fiber (RoF) techniques are good candidates to create the backbone of the next generation of wireless networks. Many parameters affect RoF communications such as amplified spontaneous emission noise (ASE), four-wave mixing nonlinearity (FWM), the modulation, channel spacing, switching voltage, and phase shifter. In this paper, we propose an improved model of RoF communication systems using subcarrier multiplexing/wavelength division multiplexing (SCM/WDM) technique with unequal channel spacing and 1-km Erbium-doped fiber amplifier (EDFA). Simulation results confirmed that we could obtain the lowest bit error rate and noises when the EDFA is placed at 1 km from the transmitter by using optical single-sideband (OSSB) modulation at frequencies 193.1 THz, 193.2 THz, 193.35 THz, and 193.6 THz.

Collaboration network of the authors

15 authors · 42 co-authorship links · 23 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Hanoi University of Industry
  • Kalasalingam Academy of Research and Education
  • Phenikaa University
  • Vietnam National University, Hanoi
  • Vietnam Academy of Science and Technology
  • VNU University of Engineering and Technology
  • Trường ĐH Nguyễn Tất Thành
  • Other organisations
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Duc-Nghia TranVietnam Academy of Science and Technology3
Quoc-Anh GianAffiliation unknown2
Dinh-Chinh NguyenVNU University of Engineering and Technology2
Le Anh NgocElectric Power University1
Thi Thu NguyenHanoi University of Industry1
Phuc Thinh DoanTrường ĐH Nguyễn Tất Thành1
Kolla Bhanu PrakashKoneru Lakshmaiah Education Foundation1
Subrata ChowdhuryAffiliation unknown1
Balakrishnan BaranitharanKalasalingam Academy of Research and Education1
Karthik ChandranAffiliation unknown1
Vaithilingam Subramaniyan MathanKalasalingam Academy of Research and Education1
Subrata ChowdhuraAffiliation unknown1
Thi-Thu NguyenHanoi University of Industry1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Improvements on the performance of subcarrier multiplexing/wavelength division multiplexing based radio over fiber system</dc:title><dc:creator>Tran, Duc-Tan</dc:creator><dc:creator>Bui, Ninh Trung</dc:creator><dc:description>&lt;jats:p&gt;Radio over fiber (RoF) techniques are good candidates to create the backbone of the next generation of wireless networks. Many parameters affect RoF communications such as amplified spontaneous emission noise (ASE), four-wave mixing nonlinearity (FWM), the modulation, channel spacing, switching voltage, and phase shifter. In this paper, we propose an improved model of RoF communication systems using subcarrier multiplexing/wavelength division multiplexing (SCM/WDM) technique with unequal channel spacing and 1-km Erbium-doped fiber amplifier (EDFA). Simulation results confirmed that we could obtain the lowest bit error rate and noises when the EDFA is placed at 1 km from the transmitter by using optical single-sideband (OSSB) modulation at frequencies 193.1 THz, 193.2 THz, 193.35 THz, and 193.6 THz.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2021-04-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v11i2.pp1439-1449</dc:identifier><dc:identifier>10.11591/ijece.v11i2.pp1439-1449</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 11 No 2 (2021); 1439</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/23853/14669</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>