In this paper, a series-fed milimeter-wave microstrip patch antenna array operating at 28 GHz is presented for wearable radio-frequency (RF) energy harvesting applications. The antenna array is made of 4×4 rectangular microstrip elements on a polyethylene terephthalate (PET) substrate to provide conformability when directly attached on human body parts. A 4-way Wilkinson power divider is connected to the array for RF power combining. The overall size of the antenna is 47×28×0.25 mm. The half-power beamwidth (HPBW) of the antenna array can be increased up to 151.9⁰ via structural deformation making it suitable for energy harvesting applications. The performance of the antenna array is investigated in terms of impedance matching, gain and radiation pattern. The average simulated specific absorption rate (SAR) of the antenna is 0.52 W/kg which is well below the safety limit of 1.6 W/kg averaged over 1 g of tissue for 100 mW of input power.
Jaringan kolaborasi para penulis
4 penulis ·
4 tautan kepenulisan bersama
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
International Islamic University Malaysia
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.