Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Chirplet signal design by FPGA

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 11 No. 3 (2021)

DOI
10.11591/ijece.v11i3.pp2120-2127
ISSN
2722-2578, 2088-8708
Terbit
2021-06-01
Penerbit
Institute of Advanced Engineering and Science
Lisensi
creativecommons.org/licenses/by-nc/4.0

Abstrak

The ever-expanding growth of the electronics and communications industries present new challenges for researchers. One of these challenges is the generation of the required bandwidth signal over a specific time frame that is used in a variety of contexts, particularly radar systems. To improve the range resolution in the radar along with better SNR, it is necessary to reduce the signal bandwidth and increase the peak power. There are some restrictions for narrowband signals like power limitation, pulse shaping, and the production of unwanted harmonics. So as a solution pulse compression techniques are suggested. Pulse compression is a process that modulating the transmitted pulse to achieve a wideband signal and then at the receiver, the received signal correlates with the transmitted pulse to achieve narrowband representations of data. Chirp is the most common signal used in pulse compression. The chirp signal is produced using linear frequency modulation. In this study, we attempted to add an amplitude modulation to the chirp signal and evaluate its performance by implementation on FPGA. The outcome signal is called chirplet and simulation will show that it enhance target detection and image quality in imaging radars like SAR.

Jaringan kolaborasi para penulis

2 penulis · 1 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Data ini berasal dari Crossref (yang disetorkan penerbit), karena endpoint OAI-PMH milik jurnal tidak dapat di-harvest.

Sumber metadata: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, pertama di-harvest 27 Okt 2026, terakhir terlihat 15 Nov 2026.
Metadata sebagai oai_dc, dikonversi dari Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Chirplet signal design by FPGA</dc:title><dc:creator>Al_Dujaili, Mohammed Jawad</dc:creator><dc:creator>Al_Awadi, Aws Majeed</dc:creator><dc:description>&lt;jats:p&gt;The ever-expanding growth of the electronics and communications industries present new challenges for researchers. One of these challenges is the generation of the required bandwidth signal over a specific time frame that is used in a variety of contexts, particularly radar systems. To improve the range resolution in the radar along with better SNR, it is necessary to reduce the signal bandwidth and increase the peak power. There are some restrictions for narrowband signals like power limitation, pulse shaping, and the production of unwanted harmonics. So as a solution pulse compression techniques are suggested. Pulse compression is a process that modulating the transmitted pulse to achieve a wideband signal and then at the receiver, the received signal correlates with the transmitted pulse to achieve narrowband representations of data. Chirp is the most common signal used in pulse compression. The chirp signal is produced using linear frequency modulation. In this study, we attempted to add an amplitude modulation to the chirp signal and evaluate its performance by implementation on FPGA. The outcome signal is called chirplet and simulation will show that it enhance target detection and image quality in imaging radars like SAR.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2021-06-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v11i3.pp2120-2127</dc:identifier><dc:identifier>10.11591/ijece.v11i3.pp2120-2127</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 11 No 3 (2021); 2120</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/21817/14760</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>