Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Impact of sensorless neural direct torque control in a fuel cell traction system

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 11 No. 4 (2021)

DOI
10.11591/ijece.v11i4.pp2725-2732
ISSN
2722-2578, 2088-8708
Terbit
2021-08-01
Penerbit
Institute of Advanced Engineering and Science
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Due to the reliability and relatively low cost and modest maintenance requirement of the induction machine make it one of the most widely used machines in industrial applications. The speed control is one of many problems in the traction system, researchers went to new paths instead the classical controllers as PI controller, they integrated the artificial intelligent for its yield. The classical DTC is a method of speed control by using speed sensor and PI controller, it achieves a decoupled control of the electromagnetic torque and the stator flux in the stationary frame, besides, the use of speed sensors has several drawbacks such as the fragility and the high cost, for this reason, the specialists went to propose an estimators as Kalman filter. The fuel cell is a new renewable energy, it has many applications in the traction systems as train, bus. This paper presents an improved control using DTC by integrate the neural network strategy without use speed sensor (sensorless control) to reduce overtaking and current ripple and static error in the system because the PI controller has some problems like this; and reduce the cost with use a renewable energy as fuel cell.

Jaringan kolaborasi para penulis

13 penulis · 29 tautan kepenulisan bersama · 5 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Bechar
  • Centre Universitaire Nour Bachir El Bayadh
  • University of Eloued
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Brahim GasbaouiUniversity of Bechar2
Allali AhmedAfiliasi tidak diketahui1
Othmane AbdelkhalekUniversity of Bechar1
Oussama HafsiUniversity of Bechar1
Toufik ToumiUniversity of Bechar1
Benabedellah AbdelkaderUniversity of Bechar1
Talebi AbderrahmaneAfiliasi tidak diketahui1
Larouci HeguigCentre Universitaire Nour Bachir El Bayadh1
Nadhir MesbahiUniversity of Eloued1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Data ini berasal dari Crossref (yang disetorkan penerbit), karena endpoint OAI-PMH milik jurnal tidak dapat di-harvest.

Sumber metadata: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, pertama di-harvest 27 Okt 2026, terakhir terlihat 15 Nov 2026.
Metadata sebagai oai_dc, dikonversi dari Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Impact of sensorless neural direct torque control in a fuel cell traction system</dc:title><dc:creator>Aissa, Benhamou</dc:creator><dc:creator>Hamza, Tedjini</dc:creator><dc:creator>Yacine, Guettaf</dc:creator><dc:creator>Mohamed, Nour</dc:creator><dc:description>&lt;jats:p&gt;&amp;lt;span&amp;gt;Due to the reliability and relatively low cost and modest maintenance requirement of the induction machine make it one of the most widely used machines in industrial applications. The speed control is one of many problems in the traction system, researchers went to new paths instead the classical controllers as PI controller, they integrated the artificial intelligent for its yield. The classical DTC is a method of speed control by using speed sensor and PI controller, it achieves a decoupled control of the electromagnetic torque and the stator flux in the stationary frame, besides, the use of speed sensors has several drawbacks such as the fragility and the high cost, for this reason, the specialists went to propose an estimators as Kalman filter. The fuel cell is a new renewable energy, it has many applications in the traction systems as train, bus. This paper presents an improved control using DTC by integrate the neural network strategy without use speed sensor (sensorless control) to reduce overtaking and current ripple and static error in the system because the PI controller has some problems like this; and reduce the cost with use a renewable energy as fuel cell.&amp;lt;/span&amp;gt;&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2021-08-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v11i4.pp2725-2732</dc:identifier><dc:identifier>10.11591/ijece.v11i4.pp2725-2732</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 11 No 4 (2021); 2725</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/20924/14991</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>