Melola Discovery

← Melola Discovery

Jurnal Tanpa peringkat SINTA

Alternative Design of a Pneumatic Conveying Machine for Rice Husk as A Coal Substitute for Rotary Kiln Fuel in Cement Factories

Rekayasa · Vol. 22 No. 2 (2024) · hlm. 62–70

DOI
10.15294/rekayasa.v22i1.18907
ISSN
2527-6964, 0216-6631
Terbit
2024-12-31
Penerbit
Universitas Negeri Semarang
Bahasa
eng

Abstrak

The reduced amount of coal transported to cement factories is being diverted to rice husk, which is biomass, to facilitate the use of increasingly expensive coal. This transition is necessary due to the different characteristics of rice husk compared to coal. Additionally, the combustion process in rotary kilns requires extremely high temperatures (1,400–1,500°C). However, a significant portion of the generated energy is lost through the kiln walls, exhaust gases, and heat radiation. These heat losses reduce thermal efficiency and increase fuel consumption. Coal, fuel oil, and natural gas are the primary energy sources for cement kilns, which are not only expensive but also have negative environmental impacts. The fluctuation in fossil fuel prices further affects overall cement production costs. To address these challenges, cement factories must design an efficient rice husk conveying system from storage to the rotary kiln. Transporting rice husks with air ensures no unintended reactions while allowing smooth flow through closed horizontal and vertical transport pipes commonly used in the industry. This study aims to design a pneumatic conveying machine with a closed air pressure system to transport biomass (rice husks) at a capacity of 7 tons/hour as an alternative fuel for rotary kilns in the cement industry. The design method follows several stages, including practical work experience, literature review, material selection, design considerations, conceptual design, calculations, and technical drawings. The proposed system utilizes the dilute phase method, with a blower power of 49.26523 kW pushing the rice husks toward the hopper. The pipeline flow parameter, measured as the pressure drop, is 132.9673 kPa. The selected materials include galvanized iron pipes with two elbows to connect horizontal and vertical sections.

Kata kunci

Jaringan kolaborasi para penulis

16 penulis · 58 tautan kepenulisan bersama · 8 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • State University of Semarang
  • Universitas Ivet
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Zuhriyan Ash Shiddieqy BahlawanState University of Semarang2
Catur Rini WidyastutiState University of Semarang1
Moch Faizal RachmadiUniversitas Ivet1
Ratna Dewi KusumaningtyasState University of Semarang1
Haniif PrasetiawanState University of Semarang1
Nadya Alfa Cahaya ImaniState University of Semarang1
Reni Ainun JannahState University of Semarang1
Rizky IchwanState University of Semarang1
Megawati MegawatiState University of Semarang1
Maulida ZakiaState University of Semarang1
Irene Nindita PradnyaState University of Semarang1
Astrilia DamayantiState University of Semarang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unnes.ac.id/journals/rekayasa/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Alternative Design of a Pneumatic Conveying Machine for Rice Husk as A Coal Substitute for Rotary Kiln Fuel in Cement Factories</dc:title>
	<dc:creator xml:lang="en">Permanadewi, Indrasukma</dc:creator>
	<dc:creator xml:lang="en">Febry Ibrahim, Ahmad</dc:creator>
	<dc:creator xml:lang="en">Azzahra Putri Solihin, Syifa</dc:creator>
	<dc:creator xml:lang="en">Aldiansyah, Rizky</dc:creator>
	<dc:subject xml:lang="en">transport biomass </dc:subject>
	<dc:subject xml:lang="en">dilute phase method </dc:subject>
	<dc:subject xml:lang="en">selected material </dc:subject>
	<dc:subject xml:lang="en">capacity </dc:subject>
	<dc:subject xml:lang="en">closed air pressure </dc:subject>
	<dc:description xml:lang="en">The reduced amount of coal transported to cement factories is being diverted to rice husk, which is biomass, to facilitate the use of increasingly expensive coal. This transition is necessary due to the different characteristics of rice husk compared to coal. Additionally, the combustion process in rotary kilns requires extremely high temperatures (1,400–1,500°C). However, a significant portion of the generated energy is lost through the kiln walls, exhaust gases, and heat radiation. These heat losses reduce thermal efficiency and increase fuel consumption. Coal, fuel oil, and natural gas are the primary energy sources for cement kilns, which are not only expensive but also have negative environmental impacts. The fluctuation in fossil fuel prices further affects overall cement production costs. To address these challenges, cement factories must design an efficient rice husk conveying system from storage to the rotary kiln. Transporting rice husks with air ensures no unintended reactions while allowing smooth flow through closed horizontal and vertical transport pipes commonly used in the industry. This study aims to design a pneumatic conveying machine with a closed air pressure system to transport biomass (rice husks) at a capacity of 7 tons/hour as an alternative fuel for rotary kilns in the cement industry. The design method follows several stages, including practical work experience, literature review, material selection, design considerations, conceptual design, calculations, and technical drawings. The proposed system utilizes the dilute phase method, with a blower power of 49.26523 kW pushing the rice husks toward the hopper. The pipeline flow parameter, measured as the pressure drop, is 132.9673 kPa. The selected materials include galvanized iron pipes with two elbows to connect horizontal and vertical sections.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Semarang</dc:publisher>
	<dc:date>2024-12-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unnes.ac.id/journals/rekayasa/article/view/18907</dc:identifier>
	<dc:identifier>10.15294/rekayasa.v22i1.18907</dc:identifier>
	<dc:source xml:lang="en">Rekayasa; Vol. 22 No. 2 (2024); 62-70</dc:source>
	<dc:source>2527-6964</dc:source>
	<dc:source>0216-6631</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.unnes.ac.id/journals/rekayasa/article/view/18907/4011</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2024 Rekayasa : Jurnal Penerapan Teknologi dan Pembelajaran</dc:rights>
</oai_dc:dc>