Melola Discovery

← Melola Discovery

Jurnal Tanpa peringkat SINTA

Effect of Ultrasonic Processing on Mechanical and Surface Properties of Chitosan-Alginate-Starch Edible Films

Rekayasa · Vol. 23 No. 2 (2025) · hlm. 94–104

DOI
10.15294/rekayasa.v23i2.49226
ISSN
2527-6964, 0216-6631
Terbit
2025-12-31
Penerbit
Universitas Negeri Semarang
Bahasa
eng

Abstrak

Marine plastic waste has driven the development of biodegradable packaging alternatives such as edible films. However, their mechanical strength and structural homogeneity remain challenging. This study investigates the effect of ultrasonic processing on the mechanical and surface properties of edible films based on chitosan–alginate–starch blends. Edible films were prepared with various polysaccharide combinations and subjected to ultrasonic treatment during processing. The sample was treated with ultrasonic waves at a frequency of 37 kHz and a temperature of 30 °C for 3 minutes. The results show that ultrasonic treatment improved surface homogeneity, as indicated by smoother structures and reduced bubble formation compared to non-ultrasonic films. In terms of mechanical properties, ultrasonic treatment exhibited varying effects on tensile strength but consistently increased elongation at break, indicating enhanced flexibility. The highest tensile strength was observed in chitosan-based films (45.479 MPa), while the highest elongation (41%) was achieved in chitosan–alginate films under ultrasonic treatment. The ternary blend (chitosan–alginate–starch) demonstrated balanced mechanical properties in both ultrasonic and non-ultrasonic conditions. Chemical analysis using FTIR spectroscopy showed that ultrasonic treatment affected intermolecular interactions within the film matrix, as indicated by shifts and changes in the intensity of absorption bands in several functional groups. These findings suggest that ultrasonic processing plays a crucial role in improving film structure and flexibility, while the polysaccharide composition governs the balance between strength and elasticity.

Kata kunci

Jaringan kolaborasi para penulis

4 penulis · 6 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Singaperbangsa Karawang
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unnes.ac.id/journals/rekayasa/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Effect of Ultrasonic Processing on Mechanical and Surface Properties of Chitosan-Alginate-Starch Edible Films</dc:title>
	<dc:creator xml:lang="en">Rahmawati, Desi</dc:creator>
	<dc:creator xml:lang="en">Hakiim, Azafilmi</dc:creator>
	<dc:creator xml:lang="en">Cintami, Indah</dc:creator>
	<dc:creator xml:lang="en">Sitinjak, Alehandro</dc:creator>
	<dc:subject xml:lang="en">Biodegradable Packaging</dc:subject>
	<dc:subject xml:lang="en">Elasticity</dc:subject>
	<dc:subject xml:lang="en">Film Structure</dc:subject>
	<dc:subject xml:lang="en">Marine Waste</dc:subject>
	<dc:subject xml:lang="en">Polysaccharide Combinations</dc:subject>
	<dc:description xml:lang="en">Marine plastic waste has driven the development of biodegradable packaging alternatives such as edible films. However, their mechanical strength and structural homogeneity remain challenging. This study investigates the effect of ultrasonic processing on the mechanical and surface properties of edible films based on chitosan–alginate–starch blends. Edible films were prepared with various polysaccharide combinations and subjected to ultrasonic treatment during processing. The sample was treated with ultrasonic waves at a frequency of 37 kHz and a temperature of 30 °C for 3 minutes. The results show that ultrasonic treatment improved surface homogeneity, as indicated by smoother structures and reduced bubble formation compared to non-ultrasonic films. In terms of mechanical properties, ultrasonic treatment exhibited varying effects on tensile strength but consistently increased elongation at break, indicating enhanced flexibility. The highest tensile strength was observed in chitosan-based films (45.479 MPa), while the highest elongation (41%) was achieved in chitosan–alginate films under ultrasonic treatment. The ternary blend (chitosan–alginate–starch) demonstrated balanced mechanical properties in both ultrasonic and non-ultrasonic conditions. Chemical analysis using FTIR spectroscopy showed that ultrasonic treatment affected intermolecular interactions within the film matrix, as indicated by shifts and changes in the intensity of absorption bands in several functional groups. These findings suggest that ultrasonic processing plays a crucial role in improving film structure and flexibility, while the polysaccharide composition governs the balance between strength and elasticity.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Semarang</dc:publisher>
	<dc:date>2025-12-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unnes.ac.id/journals/rekayasa/article/view/49226</dc:identifier>
	<dc:identifier>10.15294/rekayasa.v23i2.49226</dc:identifier>
	<dc:source xml:lang="en">Rekayasa; Vol. 23 No. 2 (2025); 94-104</dc:source>
	<dc:source>2527-6964</dc:source>
	<dc:source>0216-6631</dc:source>
	<dc:source>10.15294/rekayasa.v23i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.unnes.ac.id/journals/rekayasa/article/view/49226/10532</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2025 Rekayasa</dc:rights>
</oai_dc:dc>