Melola Discovery

← Melola Discovery

Jurnal Tanpa peringkat SINTA

Fuel Characteristics of Coconut Shell and Spent Coffee Ground Briquettes Prepared with Different Binders

Sainteknol : Jurnal Sains dan Teknologi · Vol. 24 No. 2 (2026) · hlm. 70–81

DOI
10.15294/sainteknol.v24i2.64417
ISSN
2527-3604, 0216-4566
Terbit
2026-10-26
Penerbit
Universitas Negeri Semarang
Bahasa
eng

Abstrak

Coconut shells and spent coffee grounds are biomass residues with potential for conversion into solid fuels through carbonization and densification. Binder selection plays an important role in determining the physical and fuel properties of biomass briquettes. This study evaluated the characteristics of coconut shell and spent coffee ground briquettes prepared using four different binders: tapioca starch, corn starch, poly(vinyl alcohol) (PVA), and Gohsenx Z-200. The raw materials were carbonized at 400 °C for 1 h, ground, and sieved to a particle size of 60 mesh. Coconut shell charcoal and carbonized spent coffee grounds were mixed at a mass ratio of 3:2. The mixture was combined with a 25% binder solution, compacted at 2 ton/cm², and subsequently dried. The resulting briquettes were characterized in terms of moisture content, ash content, volatile matter, fixed carbon, density, and calorific value. The moisture content, ash content, volatile matter, fixed carbon, apparent density, and gross calorific value ranged from 6.60–7.13%, 0.79–1.76%, 0.79–0.92%, 97.45–98.38%, 1.00–1.22 g/cm³, and 6159–6314 cal/g, respectively. Among the tested formulations, tapioca-starch briquettes produced the highest observed gross calorific value of 6314 cal/g and apparent density of 1.22 g/cm³, whereas corn-starch briquettes produced the lowest moisture and ash contents. Therefore, binder performance depended on the selected evaluation criterion, and no single binder demonstrated the best performance for all measured properties.

Kata kunci

Jaringan kolaborasi para penulis

15 penulis · 52 tautan kepenulisan bersama · 3 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Bandung
  • Universitas Gadjah Mada
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
NurcahyoAfiliasi tidak diketahui2
Alfiana AdhitasariPoliteknik Negeri Bandung2
Ghaniari PutriPoliteknik Negeri Bandung2
Khumaira Maulani WijayaPoliteknik Negeri Bandung2
Tifa ParamithaPoliteknik Negeri Bandung2
Rahma Ardelia RaissaAfiliasi tidak diketahui2
Mutiara Nur AnnisaAfiliasi tidak diketahui2
Muhammad Salman AlfarisiAfiliasi tidak diketahui2
Radianti Novita SariUniversitas Gadjah Mada2

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unnes.ac.id/journals/sainteknol/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Fuel Characteristics of Coconut Shell and Spent Coffee Ground Briquettes Prepared with Different Binders</dc:title>
	<dc:creator xml:lang="en">Leoanggraini, Unung</dc:creator>
	<dc:creator xml:lang="en">Prayogo, Rasendriya Syahla Putri </dc:creator>
	<dc:creator xml:lang="en">Alkays, Azzahra Belle Maerz</dc:creator>
	<dc:creator xml:lang="en">Ramawaty, Syahrani</dc:creator>
	<dc:creator xml:lang="en">Melani, Isma</dc:creator>
	<dc:creator xml:lang="en">Sihombing, Rony</dc:creator>
	<dc:subject xml:lang="en">biomass briquette</dc:subject>
	<dc:subject xml:lang="en">coconut shell</dc:subject>
	<dc:subject xml:lang="en">spent coffee grounds</dc:subject>
	<dc:subject xml:lang="en">binder</dc:subject>
	<dc:subject xml:lang="en">carbonization</dc:subject>
	<dc:description xml:lang="en">Coconut shells and spent coffee grounds are biomass residues with potential for conversion into solid fuels through carbonization and densification. Binder selection plays an important role in determining the physical and fuel properties of biomass briquettes. This study evaluated the characteristics of coconut shell and spent coffee ground briquettes prepared using four different binders: tapioca starch, corn starch, poly(vinyl alcohol) (PVA), and Gohsenx Z-200. The raw materials were carbonized at 400 °C for 1 h, ground, and sieved to a particle size of 60 mesh. Coconut shell charcoal and carbonized spent coffee grounds were mixed at a mass ratio of 3:2. The mixture was combined with a 25% binder solution, compacted at 2 ton/cm², and subsequently dried. The resulting briquettes were characterized in terms of moisture content, ash content, volatile matter, fixed carbon, density, and calorific value. The moisture content, ash content, volatile matter, fixed carbon, apparent density, and gross calorific value ranged from 6.60–7.13%, 0.79–1.76%, 0.79–0.92%, 97.45–98.38%, 1.00–1.22 g/cm³, and 6159–6314 cal/g, respectively. Among the tested formulations, tapioca-starch briquettes produced the highest observed gross calorific value of 6314 cal/g and apparent density of 1.22 g/cm³, whereas corn-starch briquettes produced the lowest moisture and ash contents. Therefore, binder performance depended on the selected evaluation criterion, and no single binder demonstrated the best performance for all measured properties.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Semarang</dc:publisher>
	<dc:date>2026-10-26</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unnes.ac.id/journals/sainteknol/article/view/64417</dc:identifier>
	<dc:identifier>10.15294/sainteknol.v24i2.64417</dc:identifier>
	<dc:source xml:lang="en">Sainteknol : Jurnal Sains dan Teknologi; Vol. 24 No. 2 (2026): December 2026 (In Press); 70-81</dc:source>
	<dc:source>2527-3604</dc:source>
	<dc:source>0216-4566</dc:source>
	<dc:source>10.15294/sainteknol.v24i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.unnes.ac.id/journals/sainteknol/article/view/64417/12007</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 Sainteknol : Jurnal Sains dan Teknologi</dc:rights>
</oai_dc:dc>