Melola Discovery

← Melola Discovery

Jurnal Tanpa peringkat SINTA

Determining Lecturers’ Research Linearity Using Simple Additive Weighting and Technique for Order Preference by Similarity to Ideal Solution

Scientific Journal of Informatics · Vol. 11 No. 4 (2025) · hlm. 1099–1108

DOI
10.15294/sji.v11i4.14024
ISSN
2407-7658, 2460-0040
Terbit
2025-03-05
Penerbit
Universitas Negeri Semarang
Bahasa
eng

Abstrak

Purpose: This study aims to conduct a comparative analysis of the decision-making methods of Simple Additive Weighting (SAW) and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) and build a decision support system that can be used to determine the linearity of lecturers’ research in their scientific fields. The analysis aims to assist relevant institutions in determining research linearity and guiding lecturers in their research policies and directions. Methods: This study compares the performance of the SAW and TOPSIS methods, against the alternative ranking of lecturers’ research linearity. The performance of both methods was measured using accuracy and MSE, where a high accuracy value indicates that the method performs better and the value of MSE is small or close to zero indicating a better relevance. Result: The results showed that the SAW method has a better accuracy value of 100% and an average MSE value of 0.13. At the same time, the TOPSIS method has an accuracy value of 33% and an average MSE value of 0.58. Novelty: This study provides knowledge about the effectiveness and efficiency of decision-making methods to determine the lecturers’ research linearity, as a guideline for related institutions regarding research policy making. In addition, the results of this study also provide a framework for evaluating the recent decision-supporting method and improving the understanding of the implementation and performance of the methods.

Kata kunci

Jaringan kolaborasi para penulis

7 penulis · 13 tautan kepenulisan bersama · 5 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Nasional Karangturi
  • Universitas Sains dan Teknologi Komputer
  • Universitas Stikubank
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Solikhin SolikhinAfiliasi tidak diketahui2
Toni Wijanarko Adi PutraUniversitas Sains dan Teknologi Komputer2
Yohanes SuhariUniversitas Stikubank1
Achmad SolechanUniversitas Sains dan Teknologi Komputer1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unnes.ac.id/journals/sji/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Determining Lecturers’ Research Linearity Using Simple Additive Weighting and Technique for Order Preference by Similarity to Ideal Solution</dc:title>
	<dc:creator xml:lang="en">Narulita, Siska</dc:creator>
	<dc:creator xml:lang="en">Nugroho, Ahmad</dc:creator>
	<dc:creator xml:lang="en">Abdillah, M. Zakki</dc:creator>
	<dc:subject xml:lang="en">Decision support system</dc:subject>
	<dc:subject xml:lang="en">Multiple criteria decision making</dc:subject>
	<dc:subject xml:lang="en">Simple additive weighting</dc:subject>
	<dc:subject xml:lang="en">Technique for order preference by similarity to ideal solution</dc:subject>
	<dc:subject xml:lang="en">Mean square error</dc:subject>
	<dc:description xml:lang="en">Purpose: This study aims to conduct a comparative analysis of the decision-making methods of Simple Additive Weighting (SAW) and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) and build a decision support system that can be used to determine the linearity of lecturers’ research in their scientific fields. The analysis aims to assist relevant institutions in determining research linearity and guiding lecturers in their research policies and directions.
Methods: This study compares the performance of the SAW and TOPSIS methods, against the alternative ranking of lecturers’ research linearity. The performance of both methods was measured using accuracy and MSE, where a high accuracy value indicates that the method performs better and the value of MSE is small or close to zero indicating a better relevance.
Result: The results showed that the SAW method has a better accuracy value of 100% and an average MSE value of 0.13. At the same time, the TOPSIS method has an accuracy value of 33% and an average MSE value of 0.58.
Novelty: This study provides knowledge about the effectiveness and efficiency of decision-making methods to determine the lecturers’ research linearity, as a guideline for related institutions regarding research policy making. In addition, the results of this study also provide a framework for evaluating the recent decision-supporting method and improving the understanding of the implementation and performance of the methods.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Semarang</dc:publisher>
	<dc:date>2025-03-05</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unnes.ac.id/journals/sji/article/view/14024</dc:identifier>
	<dc:identifier>10.15294/sji.v11i4.14024</dc:identifier>
	<dc:source xml:lang="en">Scientific Journal of Informatics; Vol. 11 No. 4: Special Issue; 1099-1108</dc:source>
	<dc:source>2407-7658</dc:source>
	<dc:source>2460-0040</dc:source>
	<dc:source>10.15294/sji.v11i4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.unnes.ac.id/journals/sji/article/view/14024/3241</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2024 Scientific Journal of Informatics</dc:rights>
</oai_dc:dc>