Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

Integrated energy management converter based on maximum power point tracking for photovoltaic solar system

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 12 No. 2 (2022)

DOI
10.11591/ijece.v12i2.pp1211-1222
ISSN
2722-2578, 2088-8708
Published
2022-04-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-sa/4.0

Abstract

This paper presents an integrated power control system for photovoltaic systems based on maximum power point tracking (MPPT). The architecture presented in this paper is designed to extract more power from photovoltaic panels under different partial obscuring conditions. To control the MPPT block, the integrated system used the ripple correlation control algorithm (RCC), as well as a high-efficiency synchronous direct current (DC-DC) boost power converter. Using 180 nm complementary metal-oxide-semiconductor (CMOS) technology, the proposed MPPT was designed, simulated, and layout in virtuoso cadence. The system is attached to a two-cell in series that generates a 5.2 V average output voltage, 656.6 mA average output current, and power efficiency of 95%. The final design occupies only 1.68 mm2.

Collaboration network of the authors

21 authors · 75 co-authorship links · 15 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Sidi Mohamed Ben Abdellah University
  • Université Privée de Fès
  • Université du Québec
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Mustapha El AlaouiSidi Mohamed Ben Abdellah University11
Fouad FarahSidi Mohamed Ben Abdellah University8
Rachid El AlamiSidi Mohamed Ben Abdellah University4
Mohammed Ouazzani-JamilUniversité Privée de Fès4
Abdelali El BoutahiriSidi Mohamed Ben Abdellah University4
Ahmed RahaliSidi Mohamed Ben Abdellah University4
Abdellali ElboutahiriSidi Mohamed Ben Abdellah University4
Ahmed LakhssassiUniversité du Québec3
Ismail BoumedraSidi Mohamed Ben Abdellah University3
Abdelamin DianiSidi Mohamed Ben Abdellah University3
Anas BoutaghlalineSidi Mohamed Ben Abdellah University2
Hatim AmezianeSidi Mohamed Ben Abdellah University1
Kamal ZaredSidi Mohamed Ben Abdellah University1
Hicham AkhamalSidi Mohamed Ben Abdellah University1
Imane HalkhamsUniversité Privée de Fès1
Youssef El AmraouiSidi Mohamed Ben Abdellah University1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Integrated energy management converter based on maximum power point tracking for photovoltaic solar system</dc:title><dc:creator>Ouremchi, Mounir</dc:creator><dc:creator>El Mouzouade, Said</dc:creator><dc:creator>El Khadiri, Karim</dc:creator><dc:creator>Tahiri, Ahmed</dc:creator><dc:creator>Qjidaa, Hassan</dc:creator><dc:description>&lt;jats:p&gt;This paper presents an integrated power control system for photovoltaic systems based on maximum power point tracking (MPPT). The architecture presented in this paper is designed to extract more power from photovoltaic panels under different partial obscuring conditions. To control the MPPT block, the integrated system used the ripple correlation control algorithm (RCC), as well as a high-efficiency synchronous direct current (DC-DC) boost power converter. Using 180 nm complementary metal-oxide-semiconductor (CMOS) technology, the proposed MPPT was designed, simulated, and layout in virtuoso cadence. The system is attached to a two-cell in series that generates a 5.2 V average output voltage, 656.6 mA average output current, and power efficiency of 95%. The final design occupies only 1.68 mm2.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2022-04-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v12i2.pp1211-1222</dc:identifier><dc:identifier>10.11591/ijece.v12i2.pp1211-1222</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 12 No 2 (2022); 1211</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/25978/15465</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>