Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

A 2.45/5.8 GHz high-efficiency dual-band rectifier for low radio frequency input power

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 12 No. 3 (2022)

DOI
10.11591/ijece.v12i3.pp2169-2176
ISSN
2722-2578, 2088-8708
Published
2022-06-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-sa/4.0

Abstract

This article proposes a concurrent rectifier for radio frequency (RF) energy harvesting from the popular ambient RF sources wireless fidelity (WiFi) 2.45 and 5.8 GHz bands. A voltage doubler-based converter circuit with the Schottky SMS7630 diode is used, this chosen diode has shown good results for low power levels. To ameliorate the resulting circuit, we used an interdigital capacitor (IDC) instead of a lumped component; and then we added a filter to reject the 3rd harmonics of each operating frequency. A dual-band impedance transformer with a direct current (DC) block function is used and optimized at low input power points for more harvested DC power. The final circuit was, therefore, more efficient and more reliable. The maximum conversion efficiencies obtained from the resulting circuit are about 60.321% for 2.45 GHz and 47.175% for 5.8 GHz at 2 dBm of input power. Compared to other previous rectifiers presented in the literature, our proposed circuit presents high efficiencies at low power levels and at these operating frequencies.

Collaboration network of the authors

16 authors · 36 co-authorship links · 7 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • University of Hassan II Casablanca
  • Abdelmalek Essaâdi University
  • Université Hassan 1er
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Abdelmajid BadriUniversity of Hassan II Casablanca6
Ikram DaanouneUniversity of Hassan II Casablanca5
Aïcha SahelUniversity of Hassan II Casablanca4
Hamid BouyghfUniversity of Hassan II Casablanca3
Souad AkkaderUniversity of Hassan II Casablanca3
Abir ZaidiUniversity of Hassan II Casablanca2
Jihane OuchrifUniversity of Hassan II Casablanca2
Btissam BoustaniUniversity of Hassan II Casablanca1
Imane AssiniUniversity of Hassan II Casablanca1
Ilyas KhelafaUniversity of Hassan II Casablanca1
Abdenaceur BaghdadAffiliation unknown1
Yassine GmihUniversité Hassan 1er1
Aziz DkiouakAbdelmalek Essaâdi University1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>A 2.45/5.8 GHz high-efficiency dual-band rectifier for low radio frequency input power</dc:title><dc:creator>El Mattar, Sara</dc:creator><dc:creator>Baghdad, Abdennaceur</dc:creator><dc:creator>Ballouk, Abdelhakim</dc:creator><dc:description>&lt;jats:p&gt;This article proposes a concurrent rectifier for radio frequency (RF) energy harvesting from the popular ambient RF sources wireless fidelity (WiFi) 2.45 and 5.8 GHz bands. A voltage doubler-based converter circuit with the Schottky SMS7630 diode is used, this chosen diode has shown good results for low power levels. To ameliorate the resulting circuit, we used an interdigital capacitor (IDC) instead of a lumped component; and then we added a filter to reject the 3rd harmonics of each operating frequency. A dual-band impedance transformer with a direct current (DC) block function is used and optimized at low input power points for more harvested DC power. The final circuit was, therefore, more efficient and more reliable. The maximum conversion efficiencies obtained from the resulting circuit are about 60.321% for 2.45 GHz and 47.175% for 5.8 GHz at 2 dBm of input power. Compared to other previous rectifiers presented in the literature, our proposed circuit presents high efficiencies at low power levels and at these operating frequencies.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2022-06-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v12i3.pp2169-2176</dc:identifier><dc:identifier>10.11591/ijece.v12i3.pp2169-2176</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 12 No 3 (2022); 2169</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/23084/15595</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>