Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

Dual tuned 1H/31P quadrature microstripline-based transmit/receive switch for 7 Tesla magnetic resonance imaging

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 12 No. 3 (2022)

DOI
10.11591/ijece.v12i3.pp2177-2183
ISSN
2722-2578, 2088-8708
Published
2022-06-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-sa/4.0

Abstract

A dual tuned transmit/receive (T/R) Switch for 7 tesla magnetic resonance imaging (MRI) that is based on concentric microstripline (MSL) coupler is introduced. The proposed switch is designed using two concentric MSL quadrature couplers on the top and bottom faces of the switch. The switch can be used to handle two frequency signals to/from two radio frequency (RF) coils. In this article, a 1H/31P atomic nuclei are excited. The two MSLs on the upper face of the switch are designed to transmit 298 and 120.6 MHz signals into RF coils, whereas each of the identical upper and lower MSLs are used to receive these signals from the RF coils. This switch can be used to transmit/receive signals from two RF coils at the same time, one work with 1H and the second with 31P atomic nuclei, and without any tuning. The proposed switch has been designed and simulated using the electromagnetic microwave studio computer simulation technology (CST). It demonstrates good matching (≈17 dB), low insertion loss (≈0.3) and high isolation (>70) for the 1H and 31P magnetic resonance signals at transmit mode. During receive mode, It demonstrates good matching (>20 dB), low insertion loss (≈0.2) and high isolation (>70) for the 1H and 31P magnetic resonance signals.

Collaboration network of the authors

4 authors · 4 co-authorship links · 1 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Applied Science Private University
  • Imam Abdulrahman Bin Faisal University
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Ayham JebreinApplied Science Private University1
Tarik BaldawiApplied Science Private University1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Dual tuned 1H/31P quadrature microstripline-based transmit/receive switch for 7 Tesla magnetic resonance imaging</dc:title><dc:creator>Abuelhaija, Ashraf</dc:creator><dc:creator>Saleh, Gameel</dc:creator><dc:description>&lt;jats:p&gt;&amp;lt;p&amp;gt;&amp;lt;span&amp;gt;A dual tuned transmit/receive (T/R) Switch for 7 tesla magnetic resonance imaging&amp;lt;/span&amp;gt; (MRI) that is based on concentric microstripline (MSL) coupler is introduced. The proposed switch is designed using two concentric MSL quadrature couplers on the top and bottom faces of the switch. The switch can be used to handle two frequency signals to/from two radio frequency (RF) coils. In this article, a 1H/31P atomic nuclei are excited. The two MSLs on the upper face of the switch are designed to transmit 298 and 120.6 MHz signals into RF coils, whereas each of the identical upper and lower MSLs are used to receive these signals from the RF coils. This switch can be used to transmit/receive signals from two RF coils at the same time, one work with 1H and the second with 31P atomic nuclei, and without any tuning. The proposed switch has been designed and simulated using the electromagnetic microwave studio computer simulation technology (CST). It demonstrates good matching (≈17 dB), low insertion loss (≈0.3) and high isolation (&amp;amp;gt;70) for the 1H and 31P magnetic resonance signals at transmit mode. During receive mode, It demonstrates good matching (&amp;amp;gt;20 dB), low insertion loss (≈0.2) and high isolation (&amp;amp;gt;70) for the 1H and 31P magnetic resonance signals.&amp;lt;/p&amp;gt;&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2022-06-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v12i3.pp2177-2183</dc:identifier><dc:identifier>10.11591/ijece.v12i3.pp2177-2183</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 12 No 3 (2022); 2177</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/23999/15596</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>