Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

Control of shunt-wound motors with DC/DC converters using the pole placement technique

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 12 No. 3 (2022)

DOI
10.11591/ijece.v12i3.pp2335-2345
ISSN
2722-2578, 2088-8708
Published
2022-06-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-sa/4.0

Abstract

Many techniques have been developed for the speed manipulation of shunt-wound direct current motors (SWDCMs) established based on armature and field control. The current research proposes a controller based on the pole placement (PP) control technique and compares it with a proportional integral (PI) controller for trajectory speed control of SWDCM with uncertainty. The circuit of the DC/DC converters energizes the DC motor. The responses are analyzed according to the dynamic mathematical model of the implemented controllers and the model of the DC/DC converters. Comparison of the motor dynamical response of the conventional PI and proposed PP controllers indicates that the PP controller exhibits improved performance in terms of rise time and steady-state error

Collaboration network of the authors

4 authors · 4 co-authorship links · 1 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Al Mamon University College
  • University of Baghdad
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Yasar N. LaftaUniversity of Baghdad1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Control of shunt-wound motors with DC/DC converters using the pole placement technique</dc:title><dc:creator>Shalash, Nadheer Abdulridha</dc:creator><dc:creator>Abdul-Adheem, Wameedh Riyadh</dc:creator><dc:creator>Abdul Jabbar, Yasir Khaldoon</dc:creator><dc:description>&lt;jats:p&gt;&amp;lt;p&amp;gt;Many techniques have been developed for the speed manipulation of shunt-wound direct current motors (SWDCMs) established based on armature and field control. The current research proposes a controller based on the pole placement (PP) control technique and compares it with a proportional integral (PI) controller for trajectory speed control of SWDCM with uncertainty. The circuit of the DC/DC converters energizes the DC motor. The responses are analyzed according to the dynamic mathematical model of the implemented controllers and the model of the DC/DC converters. Comparison of the motor dynamical response of the conventional PI and proposed PP controllers indicates that the PP controller exhibits improved performance in terms of rise time and steady-state error&amp;lt;/p&amp;gt;&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2022-06-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v12i3.pp2335-2345</dc:identifier><dc:identifier>10.11591/ijece.v12i3.pp2335-2345</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 12 No 3 (2022); 2335</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/24270/15611</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>