Automation in hydroponics is have been a great change. Research with fuzzy logic control it’s designed to add to each parameter one by one. In a way microcontroller will activate one by one relay to regulate the parameters with fuzzy logic. While parameter calibration is done, calibration is needed for the next checking if the parameter were not optimal, until its parameter optimal. Multistep fuzzy is used to counter measure the same activation of the relay. With adding real time data monitoring to the system. From test result evaluating multistep fuzzy logic method were 100% works as expected. with another testing approach for best module for sending real time data monitoring for hydroponics. From the real time data transmission method, the success of sending data is 30% from the ESP82166 and 75% of the NRF24L01 with a shortage of the NRF24L01 data loss. For the relay activation can be accommodate with dynamic programming. As for multistep fuzzy logic for hydroponic tested to reach optimal water condition for kale crops resulting in average 12.8 iterations calibration from condition where researches add water only from the start.
Collaboration network of the authors
4 authors ·
4 co-authorship links
Hover or tap a name to highlight its co-authors. Double-click to open the author's page.
Binus University
Different organisations
Same organisation
Affiliation unknown
Thicker line = more joint articles · bigger circle = more articles
Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.