Maximum power point tracking (MPPT) is considered one of the important factors in minimizing the installation costs and improving the efficiency of any photovoltaic water pumping system. The MPPT controller is specifically used to extract the maximum available power from the photovoltaic (PV) array. The maximum power can be achieved by using a specific algorithm. This work aims to raise awareness among farmers about the energy benefits available in the region of Meknes in Morocco, the economic gain and the environmental impact applied to the solar pumping system so that it can be generalized. To obtain the maximum power at each moment, a direct current (DC) water pump (SQF 0-6-2) powered by the solar panels (REC_330NP) through a buck converter was adapted. In addition, this study illustrates the theory of operation of the perturb and observe (P&O) algorithm and simulates the evaluation of this algorithm under different operating conditions (temperature and solar irradiation), and showed the advantages of this system that can operate at the optimal power regardless of disturbances.
Jaringan kolaborasi para penulis
5 penulis ·
10 tautan kepenulisan bersama
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Université Moulay Ismail de Meknes
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulis
Organisasi
Artikel bersama
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.