Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Design and implementation of two-dimensional digital finite impulse response filter using very high speed integrated circuit hardware description language

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 12 No. 4 (2022)

DOI
10.11591/ijece.v12i4.pp3684-3691
ISSN
2722-2578, 2088-8708
Terbit
2022-08-01
Penerbit
Institute of Advanced Engineering and Science
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

The main purpose of this paper is to design a two-dimensional digital finite impulse response (FIR) filter using data broadcast and non-broadcast structure. The implementation of two-dimensional digital FIR filter is done using very high speed integrated circuit hardware description language (VHDL). Rectangular window method is used for calculating 2D digital FIR filter coefficients for data broadcast and non-broadcast structure. The coefficients of the one-dimensional digital FIR filter are obtained using the MATLAB filter design and analysis (FDA) tool for two different cut-off frequencies and are multiplied to get the necessary coefficient for the two-dimensional FIR filter to be designed; the simulation is done on Artix-7 series field programmable gate array (FPGA), target device (xc7a35t-cpg236) using Vivadov.2015.2. The proposed design reduces the area utilization and the power consumption when compared with the existing literature. The experimental result shows that the power consumption is improved by 97% and there is an improvement of 24% in area utilization for the two-dimensional with and without data broadcast one dimensional FIR filter structures.

Jaringan kolaborasi para penulis

2 penulis · 1 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • National Institute of Technology Manipur
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Data ini berasal dari Crossref (yang disetorkan penerbit), karena endpoint OAI-PMH milik jurnal tidak dapat di-harvest.

Sumber metadata: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, pertama di-harvest 27 Okt 2026, terakhir terlihat 15 Nov 2026.
Metadata sebagai oai_dc, dikonversi dari Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Design and implementation of two-dimensional digital finite impulse response filter using very high speed integrated circuit hardware description language</dc:title><dc:creator>Singh, Thingujam Churchil</dc:creator><dc:creator>Kumar, Manoj</dc:creator><dc:description>&lt;jats:p&gt;&amp;lt;span&amp;gt;The main purpose of this paper is to design a two-dimensional digital finite impulse response (FIR) filter using data broadcast and non-broadcast structure. The implementation of two-dimensional digital FIR filter is done using very high speed integrated circuit hardware description language (VHDL). Rectangular window method is used for calculating 2D digital FIR filter coefficients for data broadcast and non-broadcast structure. The coefficients of the one-dimensional digital FIR filter are obtained using the MATLAB filter design and analysis (FDA) tool for two different cut-off frequencies and are multiplied to get the necessary coefficient for the two-dimensional FIR filter to be designed; the simulation is done on Artix-7 series field programmable gate array (FPGA), target device (xc7a35t-cpg236) using Vivadov.2015.2. The proposed design reduces the area utilization and the power consumption when compared with the existing literature. The experimental result shows that the power consumption is improved by 97% and there is an improvement of 24% in area utilization for the two-dimensional with and without data broadcast one dimensional FIR filter structures.&amp;lt;/span&amp;gt;&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2022-08-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v12i4.pp3684-3691</dc:identifier><dc:identifier>10.11591/ijece.v12i4.pp3684-3691</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 12 No 4 (2022); 3684</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/25328/15770</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>