In the present work, we propose an improved method based on a combination of an analytical and iterative approach to extract the photovoltaic (PV) module parameters using the measured current-voltage characteristics and the simple diode model. First, we calculate the series resistance using a set of analytical formulas for the base values of the three current-voltage curves. Then, the three other parameters are analytically expressed as functions of serial resistance and ideality factor based on the linear least-squares method. Finally, the ideality factor is calculated applying an iterative algorithm to minimize the normalized root mean square error (NRMSE) value. The proposed method was validated with a real experimental set of two PV generators, which showed the best fit to the I-V curve. Moreover, the proposed method needs only the initial value of the ideality factor.
Jaringan kolaborasi para penulis
9 penulis ·
21 tautan kepenulisan bersama
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Université Ibn Zohr
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.