In this paper, the design and analysis of dual-mode numerically controlled oscillators (NCO) based controlled oscillator frequency Modulation is implemented. Initially, input is given to the analog to digital (ADC) converter. This will change the input from analog to digital converter. After that, the pulse skipping mode (PSM) logic and proportional integral (PI) are applied to the converted data. After applying PSM logic, data is directly transferred to the connection block. The proportional and integral block will transfer the data will be decoded using the decoder. After decoding the values, it is saved using a modulo accumulator. After that, it is converted from one hot residue (OHR) to binary converter. The converted data is saved in the register. Now both data will pass through the gate driver circuit and output will be obtained finally. From simulation results, it can observe that the usage of metal oxide semiconductor field effect transistors (MOSFETs) and total nodes are very less in dual-mode NCO-based controlled oscillator frequency modulation.
Collaboration network of the authors
5 authors ·
7 co-authorship links
· 3 across different organisations
Hover or tap a name to highlight its co-authors. Double-click to open the author's page.
Koneru Lakshmaiah Education Foundation
Sathyabama Institute of Science and Technology
National Institute of Technology Warangal
Affiliation unknown
Different organisations
Same organisation
Affiliation unknown
Thicker line = more joint articles · bigger circle = more articles
Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.