Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

Fabrication and experimental study of transformer 400 V with a simple rectifier circuit design

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 13 No. 2 (2023)

DOI
10.11591/ijece.v13i2.pp1320-1328
ISSN
2722-2578, 2088-8708
Published
2023-04-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-sa/4.0

Abstract

The demand for increased voltage in renewable energy sources is relatively high. This study examines the rapid development of technology considering the use of voltage-increasing transformers. Voltage regulator circuits are generally used to stabilize the output voltage of the rectifier according to the amount of input from the transformer. However, components for high-voltage stabilizer circuits are rare, which becomes an obstacle to the stabilization of the rectifier output. This study aimed to determine the performance of the designed rectifier circuit against a non-center tap step-up direct current (DC) 400 V transformer and compare the measurement results to manual calculations. The research method is a direct comparison between the input and output voltage values of the transformer after going through a rectifier circuit. This experiment was conducted using the repeatability method three to five times for each voltage variation on the transformer. The voltage variations successfully created are 0 to 50, 0 to 100, 0 to 200, and 0 to 400 V. The output test results from the DC transformer and rectifier circuit show linear results and an increase in peak-to-peak voltage data between the transformer and rectifier outputs by 3.8%.

Collaboration network of the authors

27 authors · 35 co-authorship links · 10 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Gadjah Mada
  • Muria Kudus University
  • Sultan Ageng Tirtayasa University
  • Universitas Teuku Umar
  • Diponegoro University
  • Universitas Muhammadiyah Riau
  • Politeknik Siber dan Sandi Negara
  • Other organisations
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Ragil SaputraAffiliation unknown1
Standy OeiAffiliation unknown1
Ari MuzakirAffiliation unknown1
Anastasya LatubessyMuria Kudus University1
Frans Nurmianto AllokendekAffiliation unknown1
John SoetiknoAffiliation unknown1
Emi Budi SusilowatiAffiliation unknown1
Effan NajwainiUniversitas Gadjah Mada1
Alimuddin AlimuddinSultan Ageng Tirtayasa University1
I Gede WinayaUniversitas Gadjah Mada1
Murhaban MurhabanUniversitas Teuku Umar1
Kabul KurniawanDiponegoro University1
Mulyanto MulyantoUniversitas Muhammadiyah Riau1
Medi TarukUniversitas Gadjah Mada1
Rasna RasnaUniversitas Gadjah Mada1
Dandun Kusuma YudhaUniversitas Gadjah Mada1
Lilia Ervina Jeronimo GuterresUniversitas Gadjah Mada1
Dimas Febriyan PriambodoPoliteknik Siber dan Sandi Negara1
Retantyo WardoyoUniversitas Gadjah Mada1
Bernard Renaldy SutejaAffiliation unknown1
Suryo GuritnoAffiliation unknown1
Ridi FerdianaAssociation for Computing Machinery1
Paulus Insap SantosoUniversitas Gadjah Mada1
Lukito Edi NugrohoUniversitas Gadjah Mada1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Fabrication and experimental study of transformer 400 V with a simple rectifier circuit design</dc:title><dc:creator>Puspasari, Fitri</dc:creator><dc:creator>Sismanto, Sismanto</dc:creator><dc:creator>Ashari, Ahmad</dc:creator><dc:description>&lt;jats:p&gt;The demand for increased voltage in renewable energy sources is relatively high. This study examines the rapid development of technology considering the use of voltage-increasing transformers. Voltage regulator circuits are generally used to stabilize the output voltage of the rectifier according to the amount of input from the transformer. However, components for high-voltage stabilizer circuits are rare, which becomes an obstacle to the stabilization of the rectifier output. This study aimed to determine the performance of the designed rectifier circuit against a non-center tap step-up direct current (DC) 400 V transformer and compare the measurement results to manual calculations. The research method is a direct comparison between the input and output voltage values of the transformer after going through a rectifier circuit. This experiment was conducted using the repeatability method three to five times for each voltage variation on the transformer. The voltage variations successfully created are 0 to 50, 0 to 100, 0 to 200, and 0 to 400 V. The output test results from the DC transformer and rectifier circuit show linear results and an increase in peak-to-peak voltage data between the transformer and rectifier outputs by 3.8%.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2023-04-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v13i2.pp1320-1328</dc:identifier><dc:identifier>10.11591/ijece.v13i2.pp1320-1328</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 13 No 2 (2023); 1320</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>https://ijece.iaescore.com/index.php/IJECE/article/viewFile/27444/16331</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>