Melola Discovery

← Melola Discovery

Akses terbuka Jurnal

Horizontal Axis Multi-Blade Wind Power Plant: a Case Study in Talang, Solok Regency

Proceedings Academic Universitas Jambi · Vol. 2 No. 2 (2026) · hlm. 93–99

DOI
10.22437/proca.v2i2.55522
Terbit
2026-07-15
Penerbit
LPPM Universitas Jambi
Bahasa
en
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

This study investigates the design and performance of a multi-blade horizontal axis wind turbine as an alternative energy source in Talang, Solok Regency. The main objective is to develop a wind power generator capable of operating efficiently under the low wind speed conditions typical of the Talang area, while contributing to local electricity supply. The research methodology includes six months of field wind speed measurements at multiple hub heights to establish the wind profile, analysis of regional meteorological data, prototype design with considerations of blade number, pitch angle, and rotor diameter, and evaluation of turbine performance in terms of electrical output, power coefficient, start-up (cut-in) speed, and operational stability under varying wind and load conditions. The results show that with an optimized multi-blade configuration, the turbine achieves cut in at approximately 4-5 m/s, delivering average electrical output within ±10% of the predicted values. Efficiency levels are deemed satisfactory for local deployment, with the turbine maintaining stable operation across wind speed and load variations. Innovations include the adaptation of blade geometry suitable for low-speed wind, use of cost-effective materials, and design for low maintenance. This case study demonstrates that multi-blade horizontal axis wind turbines are viable for regions like Talang with modest wind resources. Recommendations highlight further refinement of blade design and integration of control systems for enhanced consistency and scalability in rural or remote settings.

Kata kunci

Jaringan kolaborasi para penulis

8 penulis · 28 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://online-journal.unja.ac.id/index.php/PROCA/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Horizontal Axis Multi-Blade Wind Power Plant: a Case Study in Talang, Solok Regency</dc:title>
	<dc:creator xml:lang="en">Al Faruqi, Fiqri</dc:creator>
	<dc:creator xml:lang="en">Rabiula, A.</dc:creator>
	<dc:creator xml:lang="en">Tessal, D.</dc:creator>
	<dc:creator xml:lang="en">Waladi, A.</dc:creator>
	<dc:creator xml:lang="en">Gusri, L.</dc:creator>
	<dc:creator xml:lang="en">Wijaya, A.S.</dc:creator>
	<dc:creator xml:lang="en"> Zhafarina, I. N.</dc:creator>
	<dc:creator xml:lang="en">Putra, A.R.</dc:creator>
	<dc:subject xml:lang="en">Multi-blade wind turbine</dc:subject>
	<dc:subject xml:lang="en">Horizontal axis</dc:subject>
	<dc:subject xml:lang="en">Low wind speed</dc:subject>
	<dc:subject xml:lang="en">Cut-in speed</dc:subject>
	<dc:subject xml:lang="en">Renewable energy</dc:subject>
	<dc:description xml:lang="en">This study investigates the design and performance of a multi-blade horizontal axis wind turbine as an alternative energy source in Talang, Solok Regency. The main objective is to develop a wind power generator capable of operating efficiently under the low wind speed conditions typical of the Talang area, while contributing to local electricity supply. The research methodology includes six months of field wind speed measurements at multiple hub heights to establish the wind profile, analysis of regional meteorological data, prototype design with considerations of blade number, pitch angle, and rotor diameter, and evaluation of turbine performance in terms of electrical output, power coefficient, start-up (cut-in) speed, and operational stability under varying wind and load conditions. The results show that with an optimized multi-blade configuration, the turbine achieves cut in at approximately 4-5 m/s, delivering average electrical output within ±10% of the predicted values. Efficiency levels are deemed satisfactory for local deployment, with the turbine maintaining stable operation across wind speed and load variations. Innovations include the adaptation of blade geometry suitable for low-speed wind, use of cost-effective materials, and design for low maintenance. This case study demonstrates that multi-blade horizontal axis wind turbines are viable for regions like Talang with modest wind resources. Recommendations highlight further refinement of blade design and integration of control systems for enhanced consistency and scalability in rural or remote settings.</dc:description>
	<dc:publisher xml:lang="en">LPPM Universitas Jambi</dc:publisher>
	<dc:date>2026-07-15</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://online-journal.unja.ac.id/PROCA/article/view/55522</dc:identifier>
	<dc:identifier>10.22437/proca.v2i2.55522</dc:identifier>
	<dc:source xml:lang="en">Proceedings Academic Universitas Jambi; Vol. 2 No. 2 (2026): The 3rd Jambi International Conference On Engineering, Science and Technology (JICEST); 93-99</dc:source>
	<dc:source>10.22437/proca.v2i2</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://online-journal.unja.ac.id/PROCA/article/view/55522/24952</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 Fiqri Al Faruqi, A. Rabiula, D. Tessal, A. Waladi, L. Gusri,  A. S. Wijaya,  I. N. Zhafarina, A.R. Putra</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>