Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

A simple design and fabrication of polarization reconfigurable antenna for industrial scientific and medical-band applications

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 13 No. 2 (2023)

DOI
10.11591/ijece.v13i2.pp1580-1587
ISSN
2722-2578, 2088-8708
Published
2023-04-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-sa/4.0

Abstract

This paper proposes a simple microstrip patch antenna (MPA) that can reconfigure its polarization states from linear to circular polarization in real-time by means of a PIN diode. An antenna is fed by a 50 Ω coaxial cable through the substrate of Teflon with relative permittivity of 2.15. The proposed antenna possesses a simple patch with a one-sided corner truncated to achieve polarization reconfigurability. A PIN diode is loaded to connect the main patch with a truncated corner and further maintain dual polarization states such as linear polarization (LP) and circular polarization (CP). Advanced design system (ADS) was used as a simulator to simulate the antenna, and a good understanding was obtained between simulated and measured results. Measured results showed a good agreement with simulated results at all working frequencies of interest. It shows minimum reflection coefficient gain with -10 dB scattering bandwidth 100 MHz for LP states and 170 MHz for CP states. It also shows an axial ratio of 1.56 dB for CP, and the cross-polarization level is also in a satisfying range.

Collaboration network of the authors

15 authors · 40 co-authorship links · 17 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Chittagong University of Engineering & Technology
  • Saga University
  • Military Institute of Science and Technology
  • City University of Hong Kong
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Debprosad DasChittagong University of Engineering & Technology5
Md. Farhad HossainChittagong University of Engineering & Technology5
Quazi Delwar HossainChittagong University of Engineering & Technology3
Piyas ChowdhuryChittagong University of Engineering & Technology2
Nishako ChakmaChittagong University of Engineering & Technology2
Quazi Delwar HssainChittagong University of Engineering & Technology2
Md. Motahar HossainMilitary Institute of Science and Technology2
Md Hossam-E-HaiderMilitary Institute of Science and Technology2
Mehdi Hasan ChowdhuryChittagong University of Engineering & Technology1
Ray C. C. CheungCity University of Hong Kong1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>A simple design and fabrication of polarization reconfigurable antenna for industrial scientific and medical-band applications</dc:title><dc:creator>Hossain, Md. Azad</dc:creator><dc:creator>Rahman, Muhammad Asad</dc:creator><dc:creator>Murshed, Abu Hena</dc:creator><dc:creator>Nishiyama, Eisuke</dc:creator><dc:creator>Toyoda, Ichihiko</dc:creator><dc:description>&lt;jats:p&gt;&amp;lt;span lang="EN-US"&amp;gt;This paper proposes a simple microstrip patch antenna (MPA) that can reconfigure its polarization states from linear to circular polarization in real-time by means of a PIN diode. An antenna is fed by a 50 Ω coaxial cable through the substrate of Teflon with relative permittivity of 2.15. The proposed antenna possesses a simple patch with a one-sided corner truncated to achieve polarization reconfigurability. A PIN diode is loaded to connect the main patch with a truncated corner and further maintain dual polarization states such as linear polarization (LP) and circular polarization (CP). Advanced design system (ADS) was used as a simulator to simulate the antenna, and a good understanding was obtained between simulated and measured results. Measured results showed a good agreement with simulated results at all working frequencies of interest. It shows minimum reflection coefficient gain with -10 dB scattering bandwidth 100 MHz for LP states and 170 MHz for CP states. It also shows an axial ratio of 1.56 dB for CP, and the cross-polarization level is also in a satisfying range.&amp;lt;/span&amp;gt;&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2023-04-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v13i2.pp1580-1587</dc:identifier><dc:identifier>10.11591/ijece.v13i2.pp1580-1587</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 13 No 2 (2023); 1580</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>https://ijece.iaescore.com/index.php/IJECE/article/viewFile/27760/16357</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>