Melola Discovery

← Melola Discovery

Akses terbuka Jurnal

KARAKTERISTIK PAPAN PARTIKEL DARI CAMPURAN LIMBAH AKASIA (Acacia mangium Willd.) DAN KULIT KELAPA MUDA (Cocos nucifera L.): Characteristics of Particle Board from Mixed Waste of Acacia (Acacia mangium Willd.) and Coconut Shell (Cocos nucifera L.

Jurnal Silva Tropika · Vol. 5 No. 1 (2021) · hlm. 366–381

DOI
10.22437/jsilvtrop.v5i1.12170
ISSN
2621-4113, 2615-8353
Terbit
2021-07-21
Penerbit
Fakultas Kehutanan Universitas Jambi
Bahasa
en
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

The aim of this research is to make an effort to utilize forestry waste, in the form of harvesting waste of acacia (Acacia mangiumWilld.) and coconut shells (Cocos nucifera L.) into particle boards by considering the evaluation of the value of particle board characteristics, both physical and mechanical characteristics in accordance with standards JIS A 5908-2003.This study used a factorial analysis where the first factor was the composition of the raw material for acacia: coconut (100: 0, 60:40, 50:50, 40:60 and 0:100). While the second factor is the provision of pretreatment on particles (cold soak, hot soak and without immersion).This analysis was carried out in a completely randomized design (CRD) with three repetitions.The results showed that the composition of the raw materials had a significant effect on the value of water content, water absorption, modulus of rupture and modulus of elasticity.The pretreatment had a significant effect on the thickness swelling, water absorption, modulus of rupture and modulus of elasticity. Meanwhile, the interaction of these two factors has a significant effect on the internal bond value, modulus of rupture and modulus of elasticity.Based on the results, it is known that only the density parameters that meet the JIS A 5908-2003 standard, the moisture content and thickness development parameters have not met the standards, while the mechanical characteristics of the particle board have not met the standards.Overall particle board with the composition of acacia raw material: young coconut 60:40 and heat soaking pre-treatment can produce good quality particle board.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 150 tautan kepenulisan bersama · 5 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Jambi
  • Sumatera Institute of Technology
  • Sebelas Maret University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Cory WulanUniversitas Jambi10
Rike Puspitasari TaminUniversitas Jambi6
Asrizal PaimanUniversitas Jambi4
Albayudi AlbayudiUniversitas Jambi4
Fazriyas FazriyasUniversitas Jambi3
Suci Ratna PuriUniversitas Jambi3
Marwoto MarwotoUniversitas Jambi3
Rahma Nur KomariahSumatera Institute of Technology3
Ana AgustinaSebelas Maret University3
Eva AchmadUniversitas Jambi2
Riana AnggrainiAfiliasi tidak diketahui2
Muhammad Rasyidur RidhoAfiliasi tidak diketahui2
Sumiati SimanullangAfiliasi tidak diketahui2
Maria UlfaUniversitas Jambi1
Rike Puspitasari TUniversitas Jambi1
Hamzah HamzahUniversitas Jambi1
Riana AnggrainiAfiliasi tidak diketahui1
Maria UlfaAfiliasi tidak diketahui1
Suci Ratna PuriAfiliasi tidak diketahui1
Nursanti NursantiUniversitas Jambi1
Rince MuryunikaUniversitas Jambi1
Bambang IrawanUniversitas Jambi1
Maria UlfaUniversitas Jambi1
Yernisa YernisaUniversitas Jambi1
Rince MuryanikaUniversitas Jambi1
Rahmad NurmansahUniversitas Jambi1
Andres Arya AirlanggaUniversitas Jambi1
Rajjita HandayaniUniversitas Jambi1
Rizky Ayu HardiyantiUniversitas Jambi1
Rizky SaputraUniversitas Jambi1
Mariani SafitriUniversitas Jambi1
Maijunita MaijunitaAfiliasi tidak diketahui1
Kurniati PasaribuUniversitas Jambi1
Dicky Julasdianta GintingUniversitas Jambi1
Nia PutriUniversitas Jambi1
Singgih NugrohoUniversitas Jambi1
Muhammad Fadli Putra AuliaUniversitas Jambi1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://online-journal.unja.ac.id/index.php/STP/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">KARAKTERISTIK PAPAN PARTIKEL DARI CAMPURAN LIMBAH AKASIA (Acacia mangium Willd.) DAN KULIT KELAPA MUDA  (Cocos nucifera L.): Characteristics of Particle Board from Mixed Waste of Acacia (Acacia mangium Willd.)  and Coconut Shell (Cocos nucifera L.</dc:title>
	<dc:creator xml:lang="en">Anggraini, Riana</dc:creator>
	<dc:creator xml:lang="en">Khabibi, Jauhar</dc:creator>
	<dc:creator xml:lang="en">Adelka, Yunia Frida</dc:creator>
	<dc:subject xml:lang="en">Acacia mangium WIlld.</dc:subject>
	<dc:subject xml:lang="en">Cocos nucifera L.</dc:subject>
	<dc:subject xml:lang="en">Particleboard</dc:subject>
	<dc:subject xml:lang="en">Waste</dc:subject>
	<dc:description xml:lang="en">The aim of this research is to make an effort to utilize forestry waste, in the form of harvesting waste of acacia (Acacia mangiumWilld.) and&amp;nbsp; coconut &amp;nbsp;shells (Cocos nucifera L.) into particle boards by considering the evaluation of the value of particle board characteristics, both physical and mechanical characteristics in accordance with standards JIS A 5908-2003.This study used a factorial analysis where the first factor was the composition of the raw material for acacia: coconut (100: 0, 60:40, 50:50, 40:60 and 0:100). While the second factor is the provision of pretreatment on particles (cold soak, hot soak and without immersion).This analysis was carried out in a completely randomized design (CRD) with three repetitions.The results showed that the composition of the raw materials had a significant effect on the value of water content, water absorption, modulus of rupture and modulus of elasticity.The pretreatment had a significant effect on the thickness swelling, water absorption, modulus of rupture and modulus of elasticity. Meanwhile, the interaction of these two factors has a significant effect on the internal bond value, modulus of rupture and modulus of elasticity.Based on the results, it is known that only the density parameters that meet the JIS A 5908-2003 standard, the moisture content and thickness development parameters have not met the standards, while the mechanical characteristics of the particle board have not met the standards.Overall particle board with the composition of acacia raw material: young coconut 60:40 and heat soaking pre-treatment can produce good quality particle board.</dc:description>
	<dc:publisher xml:lang="en">Fakultas Kehutanan Universitas Jambi</dc:publisher>
	<dc:date>2021-07-21</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://online-journal.unja.ac.id/STP/article/view/12170</dc:identifier>
	<dc:identifier>10.22437/jsilvtrop.v5i1.12170</dc:identifier>
	<dc:source xml:lang="en">Jurnal Silva Tropika; Vol. 5 No. 1 (2021): Jurnal Silva Tropika; 366-381</dc:source>
	<dc:source>2621-4113</dc:source>
	<dc:source>2615-8353</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://online-journal.unja.ac.id/STP/article/view/12170/11590</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2021 Jurnal Silva Tropika</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>