Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

A new hybrid method for mutual coupling minimization of an antenna array

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 13 No. 2 (2023)

DOI
10.11591/ijece.v13i2.pp2299-2308
ISSN
2722-2578, 2088-8708
Terbit
2023-04-01
Penerbit
Institute of Advanced Engineering and Science
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

In this paper, a simultaneous application of geometric modification on patch elements and electromagnetic band gap (EBG) electromagnetic bandgap structures (hybrid method) has been suggested for 3.5 GHz wireless communication applications, to minimize the mutual coupling between radiating elements of microstrip array antennas. The suggested EBG slotted structure is composed of a one square ring and three squares placed on Rogers RO3010 having 10.2 and h=1.27 mm which presents respectively its dielectric constant and thickness. In this approach, the patch elements are geometrically modified, while also employing EBG structures, formed by four EBG cells, placed between the array elements at a near distance. The modification of the geometry of the antenna and the introduction of EBG reduces the mutual coupling of an array antenna with approximately 33 dB on the one hand and improves the antenna gain by approximately 0.43 dB on the other hand. Initially, slots are introduced in the patch geometry and then four EBG unit cells are inserted between two patches, operating at 3.5 GHz. The antenna array design parameters were optimized.

Jaringan kolaborasi para penulis

7 penulis · 21 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Chouaib Doukkali University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Data ini berasal dari Crossref (yang disetorkan penerbit), karena endpoint OAI-PMH milik jurnal tidak dapat di-harvest.

Sumber metadata: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, pertama di-harvest 27 Okt 2026, terakhir terlihat 15 Nov 2026.
Metadata sebagai oai_dc, dikonversi dari Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>A new hybrid method for mutual coupling minimization of an antenna array</dc:title><dc:creator>Said, Sara</dc:creator><dc:creator>Grari, Meryem</dc:creator><dc:creator>Guetbach, Yassmina</dc:creator><dc:creator>Es-Salhi, Abdenacer</dc:creator><dc:creator>Cif Allah, Zoheir</dc:creator><dc:creator>Elhadi, Baghaz</dc:creator><dc:creator>Faize, Ahmed</dc:creator><dc:description>&lt;jats:p&gt;&amp;lt;span lang="EN-US"&amp;gt;In this paper, a simultaneous application of geometric modification on patch elements and electromagnetic band gap (EBG) electromagnetic bandgap structures (hybrid method) has been suggested for 3.5 GHz wireless communication applications, to minimize the mutual coupling between radiating elements of microstrip array antennas. The suggested EBG slotted structure is composed of a one square ring and three squares placed on Rogers RO3010 having 10.2 and h=1.27 mm which presents respectively its dielectric constant and thickness. In this approach, the patch elements are geometrically modified, while also employing EBG structures, formed by four EBG cells, placed between the array elements at a near distance. The modification of the geometry of the antenna and the introduction of EBG reduces the mutual coupling of an array antenna with approximately 33 dB on the one hand and improves the antenna gain by approximately 0.43 dB on the other hand. Initially, slots are introduced in the patch geometry and then four EBG unit cells are inserted between two patches, operating at 3.5 GHz. The antenna array design parameters were optimized.&amp;lt;/span&amp;gt;&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2023-04-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v13i2.pp2299-2308</dc:identifier><dc:identifier>10.11591/ijece.v13i2.pp2299-2308</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 13 No 2 (2023); 2299</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>https://ijece.iaescore.com/index.php/IJECE/article/viewFile/29969/16443</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>