Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

A new approach to design line start permanent magnet synchronous motors

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 13 No. 3 (2023)

DOI
10.11591/ijece.v13i3.pp2508-2516
ISSN
2722-2578, 2088-8708
Terbit
2023-06-01
Penerbit
Institute of Advanced Engineering and Science
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

The article describes a new approach to line start permanent magnet synchronous motors (LSPMSM) design process. This different, novel approach is based on the modification of mass-produced induction motors. The presented method facilitates and expedites the electrical motor design process. A field-circuit model of the motor has been created to expound the methodology of the process. Then, the machine's geometry was changed to apply permanent magnets. The problems and benefits associated with the use of permanent magnets were described. The created model was tested. The authors examined the operation of the LSPMSM motor in different states, such as starting, no-load, and blocked-rotor tests. Electromechanical characteristics have been plotted. The simulation results were compared with the parameters and characteristics of the induction motor. The conducted tests proved the correctness of the design process. The operational properties of the motor have been improved. Moreover, the validity of using LSPMSM motors instead of induction motors has also been demonstrated.

Jaringan kolaborasi para penulis

4 penulis · 6 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Wrocław University of Science and Technology
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Data ini berasal dari Crossref (yang disetorkan penerbit), karena endpoint OAI-PMH milik jurnal tidak dapat di-harvest.

Sumber metadata: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, pertama di-harvest 27 Okt 2026, terakhir terlihat 15 Nov 2026.
Metadata sebagai oai_dc, dikonversi dari Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>A new approach to design line start permanent magnet synchronous motors</dc:title><dc:creator>Swierczynski, Karol</dc:creator><dc:creator>Antal, Maciej</dc:creator><dc:creator>Habrych, Marcin</dc:creator><dc:creator>Brusilowicz, Bartosz</dc:creator><dc:description>&lt;jats:p&gt;&amp;lt;span lang="EN-US"&amp;gt;The article describes a new approach to line start permanent magnet synchronous motors (LSPMSM) design process. This different, novel approach is based on the modification of mass-produced induction motors. The presented method facilitates and expedites the electrical motor design process. A field-circuit model of the motor has been created to expound the methodology of the process. Then, the machine's geometry was changed to apply permanent magnets. The problems and benefits associated with the use of permanent magnets were described. The created model was tested. The authors examined the operation of the LSPMSM motor in different states, such as starting, no-load, and blocked-rotor tests. Electromechanical characteristics have been plotted. The simulation results were compared with the parameters and characteristics of the induction motor. The conducted tests proved the correctness of the design process. The operational properties of the motor have been improved. Moreover, the validity of using LSPMSM motors instead of induction motors has also been demonstrated.&amp;lt;/span&amp;gt;&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2023-06-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v13i3.pp2508-2516</dc:identifier><dc:identifier>10.11591/ijece.v13i3.pp2508-2516</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 13 No 3 (2023); 2508</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>https://ijece.iaescore.com/index.php/IJECE/article/viewFile/28337/16496</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>