Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

Enhanced image reconstruction of electrical impedance tomography using simultaneous algebraic reconstruction technique and K-means clustering

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 13 No. 4 (2023)

DOI
10.11591/ijece.v13i4.pp3987-3997
ISSN
2722-2578, 2088-8708
Published
2023-08-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-sa/4.0

Abstract

Electrical impedance tomography (EIT), as a non-ionizing tomography method, has been widely used in various fields of application, such as engineering and medical fields. This study applies an iterative process to reconstruct EIT images using the simultaneous algebraic reconstruction technique (SART) algorithm combined with K-means clustering. The reconstruction started with defining the finite element method (FEM) model and filtering the measurement data with a Butterworth low-pass filter. The next step is solving the inverse problem in the EIT case with the SART algorithm. The results of the SART algorithm approach were classified using the K-means clustering and thresholding. The reconstruction results were evaluated with the peak signal noise ratio (PSNR), structural similarity indices (SSIM), and normalized root mean square error (NRMSE). They were compared with the one-step gauss-newton (GN) and total variation regularization based on iteratively reweighted least-squares (TV-IRLS) methods. The evaluation shows that the average PSNR and SSIM of the proposed reconstruction method are the highest of the other methods, each being 24.24 and 0.94; meanwhile, the average NRMSE value is the lowest, which is 0.04. The performance evaluation also shows that the proposed method is faster than the other methods.

Collaboration network of the authors

12 authors · 42 co-authorship links · 8 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Airlangga
  • Institut Teknologi Sepuluh Nopember
  • Swinburne University of Technology
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Endah PurwantiUniversitas Airlangga1
Osmalina Nur RahmaUniversitas Airlangga1
Richa VaryanUniversitas Airlangga1
Sayyidul Istighfar IttaqilahAffiliation unknown1
Danny Sanjaya ArfensiaAffiliation unknown1
Tiara Dyah SosialitaAffiliation unknown1
Fitriyatul QulubUniversitas Airlangga1
Rifai ChaiSwinburne University of Technology1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Enhanced image reconstruction of electrical impedance tomography using simultaneous algebraic reconstruction technique and K-means clustering</dc:title><dc:creator>Fahrudin, Arfan Eko</dc:creator><dc:creator>Endarko, Endarko</dc:creator><dc:creator>Ain, Khusnul</dc:creator><dc:creator>Rubiyanto, Agus</dc:creator><dc:description>&lt;jats:p&gt;&amp;lt;span lang="EN-US"&amp;gt;Electrical impedance tomography (EIT), as a non-ionizing tomography method, has been widely used in various fields of application, such as engineering and medical fields. This study applies an iterative process to reconstruct EIT images using the simultaneous algebraic reconstruction technique (SART) algorithm combined with K-means clustering. The reconstruction started with defining the finite element method (FEM) model and filtering the measurement data with a Butterworth low-pass filter. The next step is solving the inverse problem in the EIT case with the SART algorithm. The results of the SART algorithm approach were classified using the K-means clustering and thresholding. The reconstruction results were evaluated with the peak signal noise ratio (PSNR), structural similarity indices (SSIM), and normalized root mean square error (NRMSE). They were compared with the one-step gauss-newton (GN) and total variation regularization based on iteratively reweighted least-squares (TV-IRLS) methods. The evaluation shows that the average PSNR and SSIM of the proposed reconstruction method are the highest of the other methods, each being 24.24 and 0.94; meanwhile, the average NRMSE value is the lowest, which is 0.04. The performance evaluation also shows that the proposed method is faster than the other methods.&amp;lt;/span&amp;gt;&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2023-08-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v13i4.pp3987-3997</dc:identifier><dc:identifier>10.11591/ijece.v13i4.pp3987-3997</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 13 No 4 (2023); 3987</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>https://ijece.iaescore.com/index.php/IJECE/article/viewFile/30924/16681</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>