Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

Pattern reconfigurable dielectric resonator antenna using capacitor loading for internet of things applications

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 13 No. 4 (2023)

DOI
10.11591/ijece.v13i4.pp4145-4151
ISSN
2722-2578, 2088-8708
Published
2023-08-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-sa/4.0

Abstract

This research study presents a cube dielectric resonator antenna (DRA) with four different radiation patterns for internet of things (IoT) applications. The various radiation patterns are determined by the grounded capacitor loading to reduce interference. The DRA is constructed of ceramic material with a dielectric constant of 30 and is fed via a coaxial probe located in the antenna’s center. Capacitors are used to load the four parasitic microstrip feed lines. Each pattern of radiation is adjustable by adjusting the capacitors loading on the feed line. The proposed antenna works at 3.5 GHz with -10 narrow impedance bandwidth of 74 MHz.

Collaboration network of the authors

15 authors · 36 co-authorship links · 21 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universiti Teknikal Malaysia Melaka
  • Universiti Utara Malaysia
  • Alrafidain University College
  • Rajamangala University of Technology Srivijaya
  • Islamia University of Bahawalpur
  • Al-Zahraa University for Women
  • University of Warith Al-Anbiyaa
  • Other organisations
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Kornkanok PhoksawatRajamangala University of Technology Srivijaya1
Shahzada KhurramIslamia University of Bahawalpur1
Muhannad Kaml AbdulhameedUniversiti Teknikal Malaysia Melaka1
Sarah Rafil HashimAl-Zahraa University for Women1
Noor Kamil AbdalhameedUniversity of Warith Al-Anbiyaa1
Imran Mohd IbrahimUniversiti Teknikal Malaysia Melaka1
Mustaqim Hakimi ShamsudinUniversiti Teknikal Malaysia Melaka1
Teddy PurnamirzaUniversitas Islam Negeri Sultan Syarif Kasim Riau1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Pattern reconfigurable dielectric resonator antenna using capacitor loading for internet of things applications</dc:title><dc:creator>Khaleel, Aymen Dheyaa</dc:creator><dc:creator>Ghazali, Osman</dc:creator><dc:creator>Jawad, Aqeel Mahmood</dc:creator><dc:creator>Ibrahim, Ayman Mohammed</dc:creator><dc:creator>Mahmuddin, Massudi</dc:creator><dc:creator>Al-Gburi, Ahmed Jamal Abdullah</dc:creator><dc:creator>Mahdi, Mohammed Najah</dc:creator><dc:description>&lt;jats:p&gt;This research study presents a cube dielectric resonator antenna (DRA) with four different radiation patterns for internet of things (IoT) applications. The various radiation patterns are determined by the grounded capacitor loading to reduce interference. The DRA is constructed of ceramic material with a dielectric constant of 30 and is fed via a coaxial probe located in the antenna’s center. Capacitors are used to load the four parasitic microstrip feed lines. Each pattern of radiation is adjustable by adjusting the capacitors loading on the feed line. The proposed antenna works at 3.5 GHz with -10 narrow impedance bandwidth of 74 MHz.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2023-08-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v13i4.pp4145-4151</dc:identifier><dc:identifier>10.11591/ijece.v13i4.pp4145-4151</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 13 No 4 (2023); 4145</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>https://ijece.iaescore.com/index.php/IJECE/article/viewFile/28883/16696</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>