Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 2

Identifikasi Barcode pada Gambar yang Ditangkap Kamera Digital Menggunakan Metode JST

IJCCS (Indonesian Journal of Computing and Cybernetics Systems) · Vol. 7 No. 2 (2013) · pp. 121–132

DOI
10.22146/ijccs.3351
ISSN
2460-7258, 1978-1520
Published
2013-07-31
Publisher
IndoCEISS in colaboration with Universitas Gadjah Mada, Indonesia.
Language
eng
License
creativecommons.org/licenses/by-sa/4.0

Abstract

AbstrakDewasa ini hampir setiap produk konsumen memiliki label barcode. Namun alat pembaca barcode jenis laser memiliki kelemahan karena tidak dapat mengenali barcode yang mengalami goresan atau noise. Namun telah dikembangkan teknik lain dengan memanfaatkan kamera digital untuk identifikasi barcode. JST telah banyak digunakan untuk identifikasi berbagai macam pola. Proses identifikasi barcode dalam JST terdiri dari proses training dan proses identifikasi. Proses training menggunakan metode LVQ (Learning Vector Quantization). Proses identifikasi terdiri dari beberapa tahap, yaitu akuisisi citra, preprocessing, locating barcode, proses pengujian dan verifikasi. Berdasarkan hasil pengujian metode LVQ dapat digunakan untuk identifikasi foto barcode dengan kinerja yang baik. Hasil pengujian menunjukkan tingkat akurasi sebesar 73,6 % dari 72 citra yang diuji dengan waktu rata-rata adalah 0.5 detik. Sementara waktu yang dibutuhkan untuk menemukan lokasi barcode adalah sekitar 6 detik menggunakan blok dengan ukuran 32x32 pixel. Kata kunci— Barcode, Learning Vector Quantization, Jaringan Syaraf Tiruan AbstrakIn today’s modern society, almost every consumer product has a barcode label. But the barcode reader with laser type has the disadvantage of not being able to recognize the barcode has a scratch or noise. However, other techniques have been developed by using a digital camera for barcode identification. ANN has been widely used for identification of various patterns. Barcode identification process consists of the ANN training process and the identification process. Training process using the LVQ (Learning Vector Quantization). Identification process consists of several stages: image acquisition, preprocessing, locating barcode, testing and verification process. Based on test results LVQ method can be used for photo identification barcode with good performance. The test results showed an accuracy of 73.6% rate of 72 images were tested with an average time is 0.5 seconds. While the time required to find the location of the barcode is about 6 seconds using a block size of 32x32 pixels. Keyword— Barcode, Learning Vector Quantization, Artificial Neural Network

Collaboration network of the authors

40 authors · 52 co-authorship links · 15 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Gadjah Mada
  • Universitas Stikubank
  • University of Indonesia
  • State University of Semarang
  • Universitas Pendidikan Ganesha
  • State University of Medan
  • Duta Wacana Christian University
  • Other organisations
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Edi WinarkoUniversitas Gadjah Mada3
Retantyo WardoyoUniversitas Gadjah Mada2
Sri T. HartatiUniversitas Gadjah Mada2
Edy WinarnoUniversitas Stikubank2
Aniati Murni ArymurthyUniversity of Indonesia2
Kridalaksana Harsa AwangAffiliation unknown1
Zaenal AbidinState University of Semarang1
Yustina RetnoAffiliation unknown1
Abriyono AbriyonoAffiliation unknown1
I Gede Aris GunadiUniversitas Pendidikan Ganesha1
Rocky Yefrenes DillakUniversitas Gadjah Mada1
Ikhwan RusliantoUniversitas Gadjah Mada1
Rahmi HidayatiUniversitas Gadjah Mada1
Refta ListiaUniversitas Gadjah Mada1
Mahmuddin YunusAffiliation unknown1
Hermawan SyahputraState University of Medan1
Sri SuwarnoDuta Wacana Christian University1
Rajif Agung YunmarSumatera Institute of Technology1
Nurmiyati TamatjitaUniversitas Gadjah Mada1
La Ode Hasnuddin S. SagalaUniversitas Gadjah Mada1
Nicodemus Mardanus SetiohardjoPoliteknik Negeri Kupang1
I Putu Adi PratamaUniversitas Gadjah Mada1
Herman HermanUniversitas Gadjah Mada1
Dian Hafidh ZulfikarUniversitas Gadjah Mada1
Made Leo RadhityaInstitut Bisnis dan Teknologi Indonesia1
Kharis SyabanUniversitas Gadjah Mada1
Pawit RiantoAffiliation unknown1
Adri PriadanaUniversitas Gadjah Mada1
Ade NurhopipahUniversitas Amikom Purwokerto1
Aina MusdholifahUniversitas Gadjah Mada1
Nelson RumuiPoliteknik Negeri Ketapang1
Angga Maulana PurbaUniversitas Gadjah Mada1
Mohammad Edi WibowoAffiliation unknown1
Wahyono WahyonoUniversitas Gadjah Mada1
Abdul KholikUniversitas Gadjah Mada1
Anny Kartika SariUniversitas Gadjah Mada1
Alfian Abdul JalidUniversitas Gadjah Mada1
Nicolaus Euclides Wahyu NugrohoUniversitas Gadjah Mada1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://journal.ugm.ac.id/ijccs/oai, first harvested 26 Okt 2026, last seen 26 Okt 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Identifikasi Barcode pada Gambar yang Ditangkap Kamera Digital Menggunakan Metode JST</dc:title>
	<dc:creator>Aliaji, Salman</dc:creator>
	<dc:creator>Harjoko, Agus</dc:creator>
	<dc:description xml:lang="en-US">AbstrakDewasa ini hampir setiap produk konsumen memiliki label barcode. Namun alat pembaca barcode jenis laser memiliki kelemahan karena tidak dapat mengenali barcode yang mengalami goresan atau noise. Namun telah dikembangkan teknik lain dengan memanfaatkan kamera digital untuk identifikasi barcode. JST telah banyak digunakan untuk identifikasi berbagai macam pola. Proses identifikasi barcode dalam JST terdiri dari proses training dan proses identifikasi. Proses training menggunakan metode LVQ (Learning Vector Quantization). Proses identifikasi terdiri dari beberapa tahap, yaitu akuisisi citra, preprocessing, locating barcode, proses pengujian dan verifikasi. Berdasarkan hasil pengujian metode LVQ dapat digunakan untuk identifikasi foto barcode dengan kinerja yang baik. Hasil pengujian menunjukkan tingkat akurasi sebesar 73,6 % dari 72 citra yang diuji dengan waktu rata-rata adalah 0.5 detik. Sementara waktu yang dibutuhkan untuk menemukan lokasi barcode adalah sekitar 6 detik menggunakan blok dengan ukuran 32x32 pixel. Kata kunci— Barcode, Learning Vector Quantization, Jaringan Syaraf Tiruan AbstrakIn today’s modern society, almost every consumer product has a barcode label. But the barcode reader with laser type has the disadvantage of not being able to recognize the barcode has a scratch or noise. However, other techniques have been developed by using a digital camera for barcode identification. ANN has been widely used for identification of various patterns. Barcode identification process consists of the ANN training process and the identification process. Training process using the LVQ (Learning Vector Quantization). Identification process consists of several stages: image acquisition, preprocessing, locating barcode, testing and verification process. Based on test results LVQ method can be used for photo identification barcode with good performance. The test results showed an accuracy of 73.6% rate of 72 images were tested with an average time is 0.5 seconds. While the time required to find the location of the barcode is about 6 seconds using a block size of 32x32 pixels. Keyword— Barcode, Learning Vector Quantization, Artificial Neural Network</dc:description>
	<dc:publisher xml:lang="en-US">IndoCEISS in colaboration with Universitas Gadjah Mada, Indonesia.</dc:publisher>
	<dc:contributor xml:lang="en-US">IndoCEISS</dc:contributor>
	<dc:date>2013-07-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.ugm.ac.id/ijccs/article/view/3351</dc:identifier>
	<dc:identifier>10.22146/ijccs.3351</dc:identifier>
	<dc:source xml:lang="en-US">IJCCS (Indonesian Journal of Computing and Cybernetics Systems); Vol 7, No 2 (2013): July; 121-132</dc:source>
	<dc:source>2460-7258</dc:source>
	<dc:source>1978-1520</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.ugm.ac.id/ijccs/article/view/3351/2910</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2013 IJCCS - Indonesian Journal of Computing and Cybernetics Systems</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>