Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

Design and implementation a novel single switch high gain DC-DC converter based on coupled inductor with low-ripple input current

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 13 No. 6 (2023)

DOI
10.11591/ijece.v13i6.pp6141-6155
ISSN
2722-2578, 2088-8708
Published
2023-12-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-sa/4.0

Abstract

A novel high-gain and high-efficiency direct current to direct current (DC-DC) converter is introduced in this paper. The presented converter is suitable for low-voltage renewable energy resources such as photovoltaic (PV) and fuel cell (FC). The existence of series inductance with the input source ensures continuous and low-ramp input current, which is important for extracting maximum power from resources. Using coupled inductor technology and an intermediate capacitor in the suggested converter leads to a high gain voltage. In the presented topology for recovering energy from the leakage inductor, reducing voltage stress on the power switch, and so decreasing overall converter losses, a passive clamp circuit is used. The suitable operation range of duty cycle in the converter, besides the leakage inductor, decreases the problem of reverse recovery in diodes. The low value of the leakage inductor and the low volume and cost of the proposed converter are due to the low turn ratio of the coupled inductor. Details of the operation principles of the proposed converter have been discussed in this paper. The presented simulation and laboratory prototype results verify the theoretical analysis and performance of the suggested topology.

Collaboration network of the authors

40 authors · 94 co-authorship links · 52 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universiti Teknikal Malaysia Melaka
  • University of Technology Malaysia
  • Islamic Azad University, Tehran
  • Universitas Ahmad Dahlan
  • Damghan University
  • Azarbaijan Shahid Madani University
  • Sultan Agung Islamic University
  • Other organisations
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Nik Rumzi Nik IdrisUniversity of Technology Malaysia9
Mohammad JannatiUniversity of Technology Malaysia9
Mohd Hatta JopriUniversiti Teknikal Malaysia Melaka8
Mohd Junaidi Abdul AzizUniversity of Technology Malaysia7
Mustafa ManapUniversiti Teknikal Malaysia Melaka7
Awang JusohUniversity of Technology Malaysia7
Abdul Rahim AbdullahUniversiti Teknikal Malaysia Melaka6
M. Rahimi YusoffUniversiti Teknikal Malaysia Melaka4
Muhammad AdoUniversity of Technology Malaysia4
Lina HandayaniUniversitas Ahmad Dahlan3
Imam Much Ibnu SubrotoSultan Agung Islamic University3
Shahreen binti KasimTun Hussein Onn University of Malaysia3
Mahmoud ZadehbagheriIslamic Azad University, Tehran3
Mohammad Javad KianiIslamic Azad University, Tehran3
Vahdat NazerianUniversity of Mazandaran3
Auzani JidinUniversiti Teknikal Malaysia Melaka2
M. GhanbariAffiliation unknown2
Munawar Agus RiyadiDiponegoro University2
Deris StiawanSriwijaya University2
M. Najafi KhoshrodiAffiliation unknown2
A.S. HussinUniversiti Teknikal Malaysia Melaka2
Mohd Ruddin Ab GhaniUniversiti Teknikal Malaysia Melaka2
Mehdi DadkhahIslamic Azad University, Tehran2
Shahaboddin ShamshirbandUniversity of Malaya2
Ahmad Saudi SamosirLampung University2
Chibuike Peter OhanuUniversity of Nigeria2
Aiman Zakwan JidinUniversiti Teknikal Malaysia Melaka1
Rozana AlikUniversity of Technology Malaysia1
M.F. HabbanUniversiti Teknikal Malaysia Melaka1
Muhammad Firdaus Abd RazakUniversity of Technology Malaysia1
Mohamad Hamka Bin SaifulUniversity of Technology Malaysia1
Abdul Rashid HusainUniversity of Technology Malaysia1
Sahazati Md RozaliUniversiti Teknikal Malaysia Melaka1
Muhammad Nizam KamarudinUniversiti Teknikal Malaysia Melaka1
Abdulhamid Usman MutawakkilUniversity of Technology Malaysia1
Moloud AbdarDamghan University1
Sharareh Rostam Niakan KalhoriDamghan University1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Design and implementation a novel single switch high gain  DC-DC converter based on coupled inductor with low-ripple input current</dc:title><dc:creator>Barmoudeh, Farid</dc:creator><dc:creator>Ajami, Ali</dc:creator><dc:creator>Sutikno, Tole</dc:creator><dc:description>&lt;jats:p&gt;A novel high-gain and high-efficiency direct current to direct current (DC-DC) converter is introduced in this paper. The presented converter is suitable for low-voltage renewable energy resources such as photovoltaic (PV) and fuel cell (FC). The existence of series inductance with the input source ensures continuous and low-ramp input current, which is important for extracting maximum power from resources. Using coupled inductor technology and an intermediate capacitor in the suggested converter leads to a high gain voltage. In the presented topology for recovering energy from the leakage inductor, reducing voltage stress on the power switch, and so decreasing overall converter losses, a passive clamp circuit is used. The suitable operation range of duty cycle in the converter, besides the leakage inductor, decreases the problem of reverse recovery in diodes. The low value of the leakage inductor and the low volume and cost of the proposed converter are due to the low turn ratio of the coupled inductor. Details of the operation principles of the proposed converter have been discussed in this paper. The presented simulation and laboratory prototype results verify the theoretical analysis and performance of the suggested topology.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2023-12-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v13i6.pp6141-6155</dc:identifier><dc:identifier>10.11591/ijece.v13i6.pp6141-6155</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 13 No 6 (2023); 6141</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>https://ijece.iaescore.com/index.php/IJECE/article/viewFile/26898/17049</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>