Melola Discovery

← Melola Discovery

Jurnal Tanpa peringkat SINTA

MEASUREMENT OF INFUSION FLOW RATE USING A DROPLET SENSOR BASED ON ARDUINO UNO

JOURNAL ONLINE OF PHYSICS · Vol. 9 No. 1 (2023) · hlm. 104–108

DOI
10.22437/jop.v9i1.28946
ISSN
2502-2016
Terbit
2023-11-02
Penerbit
Prodi Fisika FST UNJA
Bahasa
en

Abstrak

A research has been conducted to help the medical staff in the hospital. The purpose of this study is to calculate and regulate the infusion flow rate of the infusion into the patient's body. This research uses an experimental method. The liquid released from the infusion is converted into droplets, which are then detected by the LM393 optocoupler sensor, which consists of three sensors arranged around the detection area by emitting infrared light through a transmitter to detect the shadow of the droplet so that the signal is received by the receiver of the optocoupler sensor. Which is processed with the Arduino Uno microcontroller. The Arduino Uno provides the results received from the sensor and coded using the Arduino IDE software to be displayed on a 16x2-character Liquid Crystal Display (LCD). The sample used in this study was Sodium Chloride (NaCl). The calibration tools performed were droplet sensor test, servo motor test, and Real Time Clock (RTC) DS3231 module test. The results of the detection in the droplet sensor configuration showed a high degree of accuracy, with an error value of 2.414%. so that this research can be implemented in the detection and appropriate management of infusion flow rates. The current testing being carried out is still on a laboratory scale. However, in the future, this system can be developed to monitor infusions in real-time over a longer period of time and using more complex data processing functions.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 116 tautan kepenulisan bersama · 38 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Riau University
  • Universitas Riau Indonesia
  • Islamic Azad University, Science and Research Branch
  • Universitas Islam Negeri Sultan Syarif Kasim Riau
  • Sultan Idris Education University
  • University of Brawijaya
  • Sumatera Institute of Technology
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Rika TaslimUniversitas Islam Negeri Sultan Syarif Kasim Riau7
Apriwandi ApriwandiRiau University4
Widya Sinta MustikaRiau University3
Novi YantiRiau University3
Vira Annisa RosandiRiau University3
Agustino AgustinoRiau University2
ApriwandiRiau University2
Awaludin MartinRiau University2
Tengku EmrinaldiRiau University2
DefriantoUniversitas Riau Indonesia2
Sultan Fiddunya FiddunyaUniversitas Riau Indonesia2
Maria Rosariana GeaRiau University2
Yanuar YanuarRiau University2
Nadratul HanifahRiau University2
Febyola AswandiRiau University1
Beny AgustirandyAfiliasi tidak diketahui1
Dina MaryaniRiau University1
Leonardus Riski NainggolanRiau University1
Siti Rahmawati IbmarRiau University1
Sumi KomalaRiau University1
Ridho RijaldiRiau University1
Lini PratiwiRiau University1
ApriwandiAfiliasi tidak diketahui1
Fainida HasanahRiau University1
Faridah Lisa SupianSultan Idris Education University1
Yanuar HamzahRiau University1
Niloofar MozaffariIslamic Azad University, Science and Research Branch1
Nastaran MozaffariIslamic Azad University, Science and Research Branch1
Wan Mery NursyaputriAfiliasi tidak diketahui1
Zeeva Khalilah FairuzyRiau University1
Zahra KhumairahUniversity of Brawijaya1
Nursyafni NursyafniRiau University1
Afrida Helena SitorusRiau University1
Zulkarnain UsmanRiau University1
Ari Sulistyo RiniRiau University1
Yolanda RatiSumatera Institute of Technology1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://online-journal.unja.ac.id/index.php/jop/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">MEASUREMENT OF INFUSION FLOW RATE USING A DROPLET SENSOR BASED ON ARDUINO UNO</dc:title>
	<dc:creator xml:lang="en">Ihsan, Khairul </dc:creator>
	<dc:creator xml:lang="en">Nanda Setiadi, Rahmondia</dc:creator>
	<dc:creator xml:lang="en">Taer, Erman</dc:creator>
	<dc:creator xml:lang="en">Umar, Lazuardi</dc:creator>
	<dc:subject xml:lang="en">Infusion</dc:subject>
	<dc:subject xml:lang="en">Optocoupler Sensor</dc:subject>
	<dc:subject xml:lang="en">Servo Motor</dc:subject>
	<dc:subject xml:lang="en">Flow Rate</dc:subject>
	<dc:subject xml:lang="en">RTC DS3231</dc:subject>
	<dc:description xml:lang="en">A research has been conducted to help the medical staff in the hospital. The purpose of this study is to calculate and regulate the infusion flow rate of the infusion into the patient's body. This research uses an experimental method. The liquid released from the infusion is converted into droplets, which are then detected by the LM393 optocoupler sensor, which consists of three sensors arranged around the detection area by emitting infrared light through a transmitter to detect the shadow of the droplet so that the signal is received by the receiver of the optocoupler sensor. Which is processed with the Arduino Uno microcontroller. The Arduino Uno provides the results received from the sensor and coded using the Arduino IDE software to be displayed on a 16x2-character Liquid Crystal Display (LCD). The sample used in this study was Sodium Chloride (NaCl). The calibration tools performed were droplet sensor test, servo motor test, and Real Time Clock (RTC) DS3231 module test. The results of the detection in the droplet sensor configuration showed a high degree of accuracy, with an error value of 2.414%. so that this research can be implemented in the detection and appropriate management of infusion flow rates. The current testing being carried out is still on a laboratory scale. However, in the future, this system can be developed to monitor infusions in real-time over a longer period of time and using more complex data processing functions. </dc:description>
	<dc:publisher xml:lang="en">Prodi Fisika FST UNJA</dc:publisher>
	<dc:date>2023-11-02</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://online-journal.unja.ac.id/jop/article/view/28946</dc:identifier>
	<dc:identifier>10.22437/jop.v9i1.28946</dc:identifier>
	<dc:source xml:lang="en">JOURNAL ONLINE OF PHYSICS; Vol. 9 No. 1 (2023): JOP (Journal Online of Physics) Vol 9 No 1; 104-108</dc:source>
	<dc:source>2502-2016</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://online-journal.unja.ac.id/jop/article/view/28946/16642</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2023 JOURNAL ONLINE OF PHYSICS</dc:rights>
</oai_dc:dc>