Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

Design and characterization of a circularly polarized microstrip-line-fed slot array antenna for S-band applications

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 13 No. 6 (2023)

DOI
10.11591/ijece.v13i6.pp6399-6409
ISSN
2722-2578, 2088-8708
Published
2023-12-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-sa/4.0

Abstract

A 2×2 slot array antenna fed by microstrip line for circular polarization operated in the S band frequency range is designed in this paper. Single cross slot with single port feed as well as dual port feed is taken into consideration for realizing circular polarization and combining these two processes, the slot array is designed with single feed for circular polarization. The antennas are designed on a Teflon glass fiber substrate of thickness 0.8 mm. The slot array dimension is 120×142×1.636 mm 3. Smith chart of single cross slot antenna with single feed as well as dual feed has a dip at 2.69 and 2.53 GHz respectively indicate the capability of realizing circular polarization in the S band frequency range. The return loss of the slot array antenna is -58 dB shows good input impedance matching of the antenna. A dip in the smith chart of the slot array shows circular polarization near 2.4 GHz ensuring wireless applications as well. Axial ratio is found to be less than 1 dB in the resonance frequency. The impedance bandwidth percentage of the slot array antenna is 12.24%. The simulation is done by using keysight advanced design system (ADS) software.

Collaboration network of the authors

15 authors · 40 co-authorship links · 17 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Chittagong University of Engineering & Technology
  • Saga University
  • Military Institute of Science and Technology
  • City University of Hong Kong
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Muhammad Asad RahmanChittagong University of Engineering & Technology6
Abu Hena MurshedChittagong University of Engineering & Technology4
Eisuke NishiyamaSaga University3
Ichihiko ToyodaSaga University3
Md. Motahar HossainMilitary Institute of Science and Technology3
Md Hossam-E-HaiderMilitary Institute of Science and Technology3
Quazi Delwar HossainChittagong University of Engineering & Technology2
Mehdi Hasan ChowdhuryChittagong University of Engineering & Technology1
Ray C. C. CheungCity University of Hong Kong1
Piyas ChowdhuryChittagong University of Engineering & Technology1
Nishako ChakmaChittagong University of Engineering & Technology1
Quazi Delwar HssainChittagong University of Engineering & Technology1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Design and characterization of a circularly polarized microstrip-line-fed slot array antenna for S-band applications</dc:title><dc:creator>Das, Debprosad</dc:creator><dc:creator>Hossain, Md. Farhad</dc:creator><dc:creator>Hossain, Md. Azad</dc:creator><dc:description>&lt;jats:p&gt;A 2×2 slot array antenna fed by microstrip line for circular polarization operated in the S band frequency range is designed in this paper. Single cross slot with single port feed as well as dual port feed is taken into consideration for realizing circular polarization and combining these two processes, the slot array is designed with single feed for circular polarization. The antennas are designed on a Teflon glass fiber substrate of thickness 0.8 mm. The slot array dimension is 120×142×1.636 mm&amp;lt;sup&amp;gt;3&amp;lt;/sup&amp;gt;. Smith chart of single cross slot antenna with single feed as well as dual feed has a dip at 2.69 and 2.53 GHz respectively indicate the capability of realizing circular polarization in the S band frequency range. The return loss of the slot array antenna is -58 dB shows good input impedance matching of the antenna. A dip in the smith chart of the slot array shows circular polarization near 2.4 GHz ensuring wireless applications as well. Axial ratio is found to be less than 1 dB in the resonance frequency. The impedance bandwidth percentage of the slot array antenna is 12.24%. The simulation is done by using keysight advanced design system (ADS) software.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2023-12-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v13i6.pp6399-6409</dc:identifier><dc:identifier>10.11591/ijece.v13i6.pp6399-6409</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 13 No 6 (2023); 6399</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>https://ijece.iaescore.com/index.php/IJECE/article/viewFile/31517/16965</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>