Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

Design and analysis of wideband four-port multiple input multiple output antenna using defective ground structure for 5G communication

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 14 No. 2 (2024)

DOI
10.11591/ijece.v14i2.pp1646-1653
ISSN
2722-2578, 2088-8708
Published
2024-04-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-sa/4.0

Abstract

This research work describes a compact four-port multiple input multiple output (MIMO) antenna using defective ground structure (DGS), and it perfectly supports the n77, n78, and n79 frequencies in 5G new radios (NR) bands. It can cover a wideband from 3.4 to 5.4 GHz with good impedance matching. The pair of antenna elements are orientated opposite to another pair with DGS. Due to this technique, it has minimal complexity, is less expensive, and improves isolation. It has also improved the frequency band's reflection coefficient and range using MIMO antenna with different stub lengths. Because it is less expensive, FR-4 substrate is used in the implementation of all antennas. Each antenna element has two identical stubs linked to the primary radiator. On the primary radiating element, a ''HI'' slot is created. The partial ground enhances impedance matching and radiation properties throughout the targeted band. The total dimensions of the four-port MIMO antenna are 46×30×1.6 mm 3. The array elements' mutual coupling in the simulation is -14 dB. The ECC value is below 0.01, and the diversity gain (DG) is less than 10 dB. The suggested designs' measured gain ranges from 10 to 11.0 dB, and the radiation efficiency is nearly 91%.

Collaboration network of the authors

2 authors · 1 co-authorship link

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • GITAM University
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Design and analysis of wideband four-port multiple input multiple output antenna using defective ground structure for 5G communication</dc:title><dc:creator>Tamminaina, Govindarao</dc:creator><dc:creator>Manikonda, Ramesh</dc:creator><dc:description>&lt;jats:p&gt;This research work describes a compact four-port multiple input multiple output (MIMO) antenna using defective ground structure (DGS), and it perfectly supports the n77, n78, and n79 frequencies in 5G new radios (NR) bands. It can cover a wideband from 3.4 to 5.4 GHz with good impedance matching. The pair of antenna elements are orientated opposite to another pair with DGS. Due to this technique, it has minimal complexity, is less expensive, and improves isolation. It has also improved the frequency band's reflection coefficient and range using MIMO antenna with different stub lengths. Because it is less expensive, FR-4 substrate is used in the implementation of all antennas. Each antenna element has two identical stubs linked to the primary radiator. On the primary radiating element, a ''HI'' slot is created. The partial ground enhances impedance matching and radiation properties throughout the targeted band. &amp;lt;span&amp;gt;The total dimensions of the four-port MIMO antenna are 46×30×1.6 mm&amp;lt;sup&amp;gt;3&amp;lt;/sup&amp;gt;. The array elements' mutual coupling in the simulation is -14 dB. The ECC value is below 0.01, and the diversity gain (DG) is less than 10 dB. The suggested designs' measured gain ranges from 10 to 11.0 dB, and the radiation efficiency is nearly 91%.&amp;lt;/span&amp;gt;&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2024-04-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v14i2.pp1646-1653</dc:identifier><dc:identifier>10.11591/ijece.v14i2.pp1646-1653</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 14 No 2 (2024); 1646</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>https://ijece.iaescore.com/index.php/IJECE/article/viewFile/33851/17239</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>