Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Design of higher gain linearly polarized 2×2 microstrip patch array antenna for wireless communication

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 14 No. 3 (2024)

DOI
10.11591/ijece.v14i3.pp2695-2707
ISSN
2722-2578, 2088-8708
Terbit
2024-06-01
Penerbit
Institute of Advanced Engineering and Science
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

The fifth-generation technology is popular and best as far as data rates are concerned for wireless applications. To meet the increased demand of the modern world for faithful communication, this research work is carried out. In this approach, a single patch, 1×2 array, and 2×2 array are designed using a low-cost FR4 dielectric substrate ( =4.4) covering the 3.3–3.8 GHz frequency band. Due to the lack of gain from arrays in the present research, an attempt is made to achieve excellent gain from arrays with a minimum number of patches. First, the gain of a single inset-fed antenna is compared with another normal single patch of the same thickness but with an additional air dielectric medium. Next, the second single patch is extended to obtain a rectangular 1×2 array and a 2×2 array antenna. A second single patch measuring 50×32.5×0.8 mm is designed assuming an infinite ground plane. It has 3mm air gap between the patch strip and the ground. Air acts as a second dielectric layer that reduces power loss. This allows a maximum gain of 15.2 dB with a return loss of -22 dB. Also, antenna efficiency and bandwidth are 91% and 267.69 MHz, respectively.

Jaringan kolaborasi para penulis

2 penulis · 1 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Visvesvaraya Technological University
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Data ini berasal dari Crossref (yang disetorkan penerbit), karena endpoint OAI-PMH milik jurnal tidak dapat di-harvest.

Sumber metadata: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, pertama di-harvest 27 Okt 2026, terakhir terlihat 15 Nov 2026.
Metadata sebagai oai_dc, dikonversi dari Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Design of higher gain linearly polarized 2×2 microstrip patch array antenna for wireless communication</dc:title><dc:creator>Gani, Prakash G.</dc:creator><dc:creator>Hegde, Shriram P</dc:creator><dc:description>&lt;jats:p&gt;The fifth-generation technology is popular and best as far as data rates are concerned for wireless applications. To meet the increased demand of the modern world for faithful communication, this research work is carried out. In this approach, a single patch, 1×2 array, and 2×2 array are designed using a low-cost FR4 dielectric substrate ( =4.4) covering the 3.3–3.8 GHz frequency band. Due to the lack of gain from arrays in the present research, an attempt is made to achieve excellent gain from arrays with a minimum number of patches. First, the gain of a single inset-fed antenna is compared with another normal single patch of the same thickness but with an additional air dielectric medium. Next, the second single patch is extended to obtain a rectangular 1×2 array and a 2×2 array antenna. A second single patch measuring 50×32.5×0.8 mm is designed assuming an infinite ground plane. It has 3mm air gap between the patch strip and the ground. Air acts as a second dielectric layer that reduces power loss. This allows a maximum gain of 15.2 dB with a return loss of -22 dB. Also, antenna efficiency and bandwidth are 91% and 267.69 MHz, respectively.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2024-06-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v14i3.pp2695-2707</dc:identifier><dc:identifier>10.11591/ijece.v14i3.pp2695-2707</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 14 No 3 (2024); 2695</dc:source><dc:source>2722-2578</dc:source><dc:source>2088-8708</dc:source><dc:relation>https://ijece.iaescore.com/index.php/IJECE/article/viewFile/34238/17361</dc:relation><dc:rights>http://creativecommons.org/licenses/by-sa/4.0</dc:rights></oai_dc:dc>