This research investigates the problem of Cu-Zn electrode batteries with NaCl electrolyte. Previous studies have indicated problems with the electrolyte and electrodes after charging, such as turbidity and deposits in the electrolyte, as well as corrosion on the electrodes. Consequently, the battery can only be used once due to a decline in its electrical characteristics after the initial charging. Through this research, improvements were made to the electrical characteristics of the battery by adding Na-EDTA to enhance usage efficiency. The research method involved mixing NaCl solution with the highest electrical conductivity, using six pairs of Cu-Zn electrodes arranged in series. The physical conditions of the electrolyte and electrodes were observed, and electrical characteristics were measured. The research results indicate that the use of NaCl+Na-EDTA electrolyte produces a battery voltage of 4.20 volts with a current of 2 Ah and can be used twice. Charging with solar panels can be done in 1 hour, but the frequency is limited to two times.
Collaboration network of the authors
9 authors ·
24 co-authorship links
· 8 across different organisations
Hover or tap a name to highlight its co-authors. Double-click to open the author's page.
Medan Area University
Andalas University
Different organisations
Same organisation
Affiliation unknown
Thicker line = more joint articles · bigger circle = more articles
Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.