Melola Discovery

← Melola Discovery

Jurnal

Rancang Bangun Pemutus Otomatis Charger Baterai Laptop dengan Algoritma Watchdog Berbasis Single Board Microcontroller

Circuit: Jurnal Ilmiah Pendidikan Teknik Elektro · Vol. 5 No. 2 (2021) · hlm. 166–175

DOI
10.22373/crc.v5i2.9332
ISSN
2549-3701, 2549-3698
Terbit
2021-09-01
Penerbit
PTE FTK UIN Ar-Raniry
Bahasa
eng

Abstrak

Laptop is kind of device which recently used by students, teachers, workers, professionals or executives. As the electronics tools, Laptop is supported by a battery and charger. To save battery life, laptop users usually disconnect the charger from the laptop while the indicator shows the battery is fully charged or when the laptop is turned off. However, due to practicality considerations, it often happens that the AC side of the charger is still connected to the voltage source. However, it was a waste condition. Because even though it's small, when the battery is full the charger still dissipates power. In this study, a device was designed and built which has the ability to disconnect the AC source from the charger when the DC charger side is not connected to the laptop. The watchdog algorithm is used to determine when the current should be cut off. The device is realized by using a Single Board Microcontroller (SBM) and a current sensor ACS712.

Kata kunci

Jaringan kolaborasi para penulis

8 penulis · 16 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Gadjah Mada
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Budi Bayu MurtiUniversitas Gadjah Mada1
Muhammad Andika PratamaUniversitas Gadjah Mada1
Nur Risya Difa Kusuma NingrumUniversitas Gadjah Mada1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://jurnal.ar-raniry.ac.id/index.php/circuit/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Rancang Bangun Pemutus Otomatis Charger Baterai Laptop dengan Algoritma Watchdog Berbasis Single Board Microcontroller</dc:title>
	<dc:creator xml:lang="en">Pradana, Adlan Bagus</dc:creator>
	<dc:creator xml:lang="en">Wahyu K, Bima</dc:creator>
	<dc:creator xml:lang="en">Kusuma J, Dian</dc:creator>
	<dc:creator xml:lang="en">Zeqlyw H, Faisal</dc:creator>
	<dc:creator xml:lang="en">Roza Y, Thalia</dc:creator>
	<dc:subject xml:lang="en">Laptop Charger</dc:subject>
	<dc:subject xml:lang="en">Switch</dc:subject>
	<dc:subject xml:lang="en">Watchdog Algorithm</dc:subject>
	<dc:description xml:lang="en">Laptop is kind of device which recently used by students, teachers, workers, professionals or executives. As the electronics tools, Laptop is supported by a battery and charger. To save battery life, laptop users usually disconnect the charger from the laptop while the indicator shows the battery is fully charged or when the laptop is turned off. However, due to practicality considerations, it often happens that the AC side of the charger is still connected to the voltage source. However, it was a waste condition. Because even though it's small, when the battery is full the charger still dissipates power. In this study, a device was designed and built which has the ability to disconnect the AC source from the charger when the DC charger side is not connected to the laptop. The watchdog algorithm is used to determine when the current should be cut off. The device is realized by using a Single Board Microcontroller (SBM) and a current sensor ACS712.</dc:description>
	<dc:publisher xml:lang="en">PTE FTK UIN Ar-Raniry</dc:publisher>
	<dc:date>2021-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://jurnal.ar-raniry.ac.id/index.php/circuit/article/view/9332</dc:identifier>
	<dc:identifier>10.22373/crc.v5i2.9332</dc:identifier>
	<dc:source xml:lang="en">Circuit: Jurnal Ilmiah Pendidikan Teknik Elektro; Vol. 5 No. 2 (2021); 166-175</dc:source>
	<dc:source>2549-3701</dc:source>
	<dc:source>2549-3698</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://jurnal.ar-raniry.ac.id/index.php/circuit/article/view/9332/5959</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2021 Adlan Bagus Pradana,Bima Wahyu K, Dian Kusuma J, Faisal Zeqlyw H, Thalia Roza Y</dc:rights>
</oai_dc:dc>